Lowest one piece mount

[sliderspal]

Which company (EGW, Badger, Farrell, Seekins or any other)
That manufactures the lowest 20 moa one piece rail that would fit my Savage 10 FCP-K ?
I want to use Burris signature Zee rings and the shortest rings in this style are medium height.
So I need to lowest one piece base so my SS scope won't ride too high.

[pdog06]

Check out the Warne 1pc rails. They dont sit nearly as high as a Farrel or EGW. Just not sure if they have them in 20moa or not.

[pdog06]

Here ya go. They make a 20moa.. Aint cheap though.

http://swfa.com/Savage-C2397.aspx

Dont think you'll find one shorter than this one. If so it wont be by much.

[pa hog]

The Warne 20moa would be the lowest or you could use a 0moa Base and use the inserts in your Burris rings to get your 20moa.

[rjtfroggy]

http://swfa.com/EGW-Picatinny-Rail-1-Piece-Scope-Mount-P12398.aspx
Here is another. less than half the price.

[pdog06]

just remember, the lower that 1pc base is the less room you have to load rounds in the magbox from the top.

Like Pahog says, your lowest setup is gonna be the base I linked in a 0moa, and a set of offset inserts to lower the front of the scope to give you your cant. The Warne is definately lower than the EGW though, but 2x the cost.

[sliderspal]

Thanks for the quick replies.
The 10 FCP-K has a detachable box mag. so loading from the top isn't a issue.
I was also thinking of a 0 moa base and using the ring inserts to give me angle I need.

[dolomite_supafly]

Not sure how much lower it is by EGW recently released a HD base that is .1" lower than there standard bases. They also make it in a 20 MOA HD version.



What makes the HD mount special?
- Machined from 7075 aircraft aluminum
- Full length cross-slots to true picatinny specifications
- Lower profile (approx. .100" lower than the standard mounts)
- TORX screws provided with TORX allen key
- Two-stage hard coat anodizing


HD Savage
$69.99
(http://egw-guns.com/store/index.php?main_page=product_info&cPath=39_142&products_id=480)

Dolomite

[EGW1]

Thanks Dolo,

The HD Savage rails are .350 from the top of the receiver to the top of the rail.
They also extend appx 5/8 past the receiver in the front so you have more options where you mount your scope.

Thank you for the interest!
geo

www.egwguns.com