Accustock question

[teebirdhyzer]

I have a newer model 14 classic with DBM and bottom bolt release. Will this not fit into an Accustock?

[snowgetter1]

The recoil lug is different I believe. Yours may not fit into the accuwedge area.

[thomae]

Snowgetter is correct. Once you change out the recoil lug, you "should" have no problem.

To change the recoil lug, you will have to remove the barrel. So you will need the proper tools to do that.
You will also need to re-headspace the barrel when you put it all back together.

Here are some pictures of the different lugs from the MidwayUSA website:
Standard Lug:
http://media.midwayusa.com/productimages/880x660/Primary/820/820231.jpg

Accustock recoil lug:
http://media.midwayusa.com/productimages/880x660/Primary/238/238465.jpg

[teebirdhyzer]

thanks guys. I have swapped a bunch of barrels and have all the correct tools. Just wasn't sure about what was different. Thanks for the good info and pics thomae....that helps!