View Full Version : extractor ?
desertdog
03-03-2010, 09:01 PM
does savage make more that one size? the reason i am asking is i got a Stevens 200 .223 the extractor is twice as long compared to a extractor for a .308? i thought it mite help with my 22-250 problem? maybe not ? just a thought. thanks. 8) dd
I believe they are one size...one is longer to reach the rim of the smaller cal.
sharpshooter
03-04-2010, 02:22 AM
There are 2 different extractors. The .223 version is longer overall, but the dimensions are the same on the business end. A standard extractor will work for a .378" bolt face, but the longer .223 style will not work in a std. .473" bolt face. The longer outside end will bottom out on the receiver bore before it will snap over a cartridge rim.
desertdog
03-04-2010, 10:33 PM
There are 2 different extractors. The .223 version is longer overall, but the dimensions are the same on the business end. A standard extractor will work for a .378" bolt face, but the longer .223 style will not work in a std. .473" bolt face. The longer outside end will bottom out on the receiver bore before it will snap over a cartridge rim.
makes sense. where would you start with a 22-250? 8) dd
sharpshooter
03-05-2010, 08:07 PM
Start with what???
desertdog
03-05-2010, 08:29 PM
sorry,some times my 22-250 drops the case when i pull the bolt back to remove a fired case?
Try one size larger ball bearing under the extractor, can't remember the size.
But SSS has them.
BillPa
03-05-2010, 10:28 PM
Try one size larger ball bearing under the extractor, can't remember the size.
But SSS has them.
.140"
desertdog
03-06-2010, 11:16 PM
cool, thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.