earl39
12-15-2013, 03:05 PM
Several guys have mentioned using different brass. Do you just use a neck sizing die to neck the case down or full length sizing die? I've never necked down any brass before.
You will have to use a regular or bushing die. You can't neck down with a Lee collet die but you can neck size with one after it has been sized down. I would recommend using a full length die to neck down fired brass and suggest doing the same with new brass to keep from bulging the brass.
You will have to use a regular or bushing die. You can't neck down with a Lee collet die but you can neck size with one after it has been sized down. I would recommend using a full length die to neck down fired brass and suggest doing the same with new brass to keep from bulging the brass.