looking for pics of cheek rests installed

[dxjxrose]

lol i have a bench but its 2 miles up the road at my shop did most the work there but needed the oven to heat and shape the rest

[dxjxrose]

here she is with the new scope mounted!!!

http://i1246.photobucket.com/albums/gg615/dxjxrose/1495608_10152069661332044_1696703060_o_zpsfb712536 .jpg (http://s1246.photobucket.com/user/dxjxrose/media/1495608_10152069661332044_1696703060_o_zpsfb712536 .jpg.html)

[JMGlasgow]

Build it! They shoot great!

http://i1281.photobucket.com/albums/a510/PJ0527/2d71b5b0-f61a-472a-ac1a-a90ef4b048ab_zpsfb1d6f80.jpg

Sent from my HTCEVOV4G using Tapatalk 2

What stock is that? Did you install that cheek rest?

[Brent]

This is my first one. I have modified it slightly since. I still use the neoprene cover, it feels good on the face, but the insides have changed a little. The original is piece of pipe that is split and shaped with a torch to the shape of a U. Inside the U I put high density foam for the lift. I taped the piece down and pulled the neoprene over it. To clean the rifle I just pull the neoprene forward and remove the rest, clean, retape. I use electrical tape and it holds nicely.

New design is a 1" wood dowel cut and shaped, then pinned. The pins go into the top of the stock which has holes drilled. No taping. Neoprene is still used. It is really comfy on the cheek.


http://i981.photobucket.com/albums/ae298/BrentMartell/photo.jpg

[davemuzz]

Savage Model 10 Precision Carbine.

http://i12.photobucket.com/albums/a212/davemuzz/photo11-1.jpg

[dxjxrose]

This is my first one. I have modified it slightly since. I still use the neoprene cover, it feels good on the face, but the insides have changed a little. The original is piece of pipe that is split and shaped with a torch to the shape of a U. Inside the U I put high density foam for the lift. I taped the piece down and pulled the neoprene over it. To clean the rifle I just pull the neoprene forward and remove the rest, clean, retape. I use electrical tape and it holds nicely.

New design is a 1" wood dowel cut and shaped, then pinned. The pins go into the top of the stock which has holes drilled. No taping. Neoprene is still used. It is really comfy on the cheek.


http://i981.photobucket.com/albums/ae298/BrentMartell/photo.jpg
id like to see the inner workings of this if you could

[cowboy318]

http://img.tapatalk.com/d/14/02/05/hu2ahy8e.jpg

I used the styrofoam that was in the box the rifle came in

[2111 Marine]

i'm getting ready to order a Karstens cheek rest http://www.karstenskydexcheekrest.com/

[LoneWolf]

i'm getting ready to order a Karstens cheek rest http://www.karstenskydexcheekrest.com/

Check out "tactical works" I picked up a "blemished" model that looks just fine for $40 rather than paying $60.

[fgw_in_fla]

Here ya go.
I have 4 of these. Good quality at a lower cost. I even had one of the hardware kits rust a little. I know what you're thinking. How could steel rust on the coast of Florida.
Well, its true & the guy at Southwest sent me a new hardware kit & even paid return postage on the old stuff. The kit even comes with drill bit, allen wrenches & instructions even I could understand.
Why pay more?

http://www.swpcustom.com/cheekrests.html