Stevens 200 ... 243 & 22-250 barreled actions / factory stock swapping ???

[Yankee Bill]

Hi Folks,

New guy here, and kinda new to the Stevens 200 as well. I'm sure this a no brainer for you seasoned Stevens guys, but I was wondering, given the magazine configurations & action screw spacing were the same on both guns, if the factory Tupperware stocks were a drop-in swap between the two calibers. The .243 stock is cammo and the 22-250 is grey and want to swap them around.

Thanks for any input you may have to offer.
YB

[Maztech89]

If the magazine cutout and bolt spacing is identical, swap away. Takes about 3 minutes, give it a try and you will know for sure quickly. Good luck! -MAZ-

[Yankee Bill]

If the magazine cutout and bolt spacing is identical, swap away. Takes about 3 minutes, give it a try and you will know for sure quickly. Good luck! -MAZ-

Thanks. I didn't know if caliber had any effect on the stocks being interchangeable. Figured I'd ask first before I started messing with them. Appreciate the help.
YB

[multitoes]

The 243 magazine is different than the 22-250 so swap them as well. 243 should work OK in 22-250 mag but the 22-250 in 243 mag may give you trouble with the rounds popping free during feeding.

[RP12]

Thanks. I didn't know if caliber had any effect on the stocks being interchangeable. Figured I'd ask first before I started messing with them. Appreciate the help.
YBSwitch away. I switched a 22-250 with a 300 WSM just to try it and they were the same. Except for the mags of course.

[Yankee Bill]

Thanks guys, appreciate the info.
YB