6mmBR gage needed

[Cat 64]

I wonder if anyone has an extra Hornady Lock-N-Load Overall Length Gage Modified Case 6mm BR (Bench Rest) or at least guide to where I can find one NOW (in stock). Thank you.

[stangfish]

Read this article all the way through. Might rethink using a LNL gauge.
http://www.savageshooters.com/showthread.php?30527-Bullet-Seating-Depth-Measuring-Problem-Touch-Jamb-or

[kdvarmint]

Here is an option if you cannot locate one.
http://6mmbr.websitetoolbox.com/post?home-made-modified-case-3679969

I use them, and yes it takes a little practice to get a good feel for it, but I like them

[Cat 64]

Thanks. I researched that avenue but it's not that simple as it looks. Concentricity is important and hard to achieve. Besides I believe the real size for the tap needed ( if you want to use it with a Hornady Lock'n Load) is 5/16x32. The solution I will employ is sending two fired un- prepped cases to Hornady and they will do all the rest. They charge $15 for each caliber.

[kdvarmint]

Glad to see you'll get what you need.