polishing the savage 110 bolt [Archive]

p5200

08-19-2009, 03:02 AM

Anyone know of any links on this subject? I've been searching with no, luck so far. Thanks! :)

Blue Avenger

08-19-2009, 11:07 AM

Don't think there are any. Here is one 82boy has
http://img.photobucket.com/albums/v675/gcidso123/savage/Patsbolt.jpg

p5200

08-19-2009, 02:32 PM

Don't think there are any. Here is one 82boy has
http://img.photobucket.com/albums/v675/gcidso123/savage/Patsbolt.jpg
Wow! that's a master piece. :o

ellobo

08-19-2009, 06:37 PM

Its nice to know I aint the onlyone who likes Stainless lugs, nuts, bolts triggerguards on a blued action. Adds a touch of class.

El Lobo

memilanuk

08-19-2009, 06:54 PM

Scha-wingggggg!!!

Who, what, when, where, and how much?!?

Used to be a place that did custom bolt fluting - spiral, helix, etc. but I can't find a link to 'em any more.

pdog06

08-19-2009, 07:05 PM

Scha-wingggggg!!!

Who, what, when, where, and how much?!?

Used to be a place that did custom bolt fluting - spiral, helix, etc. but I can't find a link to 'em any more.

none other than Fred at SSS. Think it runs around $75 IIRC

GLZ

08-19-2009, 07:11 PM

Scha-wingggggg!!!

Who, what, when, where, and how much?!?

Used to be a place that did custom bolt fluting - spiral, helix, etc. but I can't find a link to 'em any more.

http://www.kampfeldcustom.com/

memilanuk

08-19-2009, 07:14 PM

I saw them when I was searching... don't think its the same outfit (name doesn't sound familiar), but its definitely a more professional looking website - maybe they stepped up a little ;)

like2shoot

08-20-2009, 10:29 AM

http://www.twistedbarrel.com/designs.html

http://www.tiptopwebsite.com/websites/index2.php?username=ssgcustomrifles&page=3

memilanuk

08-20-2009, 12:33 PM

Twisted Barrel, that was it!

louthedog

08-20-2009, 09:37 PM

As for just polishing the bolt it's pretty easy. I use some fine sandpaper (1500 grit) to polish out the "Savage" laser engraving and to smooth every thing up. Then use some Flitz on a rag and buff away. A few beers later you'll have it shining like chrome.

p5200

08-20-2009, 09:46 PM

Not sure what Flitz is but, I have some medium and fine grease type vale lapping compound if that would work and also a Dremel tool with buffing pads? Thanks! :)

p5200

08-20-2009, 10:01 PM

Ah, I found the link again for those interested. :) http://www.steyrscout.org/savscout.htm

Nitroused383

08-21-2009, 06:15 AM

I did this at work on the CNC Lathe. Also please no one PM as am not allowed to do this for a profit.

http://i60.photobucket.com/albums/h8/nitroused383/Picture014.jpg

http://i60.photobucket.com/albums/h8/nitroused383/Picture016.jpg

longshotCPL

10-10-2009, 04:25 PM

now THAT is a fine looking bolt!

Fjold

10-10-2009, 05:52 PM

I did this at work on the CNC Lathe. Also please no one PM as am not allowed to do this for a profit.

Do it for free then! ;D

cwop

10-10-2009, 06:34 PM

har de har har har!!!!!!!!!!!!!!!!!!!!!!!!!

thats some beautiful work wish i could do something like that!
bob

big honkin jeep

10-10-2009, 11:43 PM

If you're just looking to polish off the laser etching or some minor scratching a scotch brite pad makes quick work of it.
BHJ

dcloco

10-11-2009, 04:37 PM

I did this at work on the CNC Lathe. Also please no one PM as am not allowed to do this for a profit.

You will do this for free then? :)

Need your address!

Nitroused383

10-11-2009, 10:26 PM

Did a few Remingtons at work for friends too! The Savage looks better though. Although the Sendero with black paint in the spiral flutes of the bolts matches the barrel nicely ;D