Name removal ?

[RP12]

How do you get the name and logo off the bolt body ?

[missed]

Send it to sss for a fishnet flute job.

I think its a nitride coating, you could re nitride or blue it or just sand it down, but that metal is HARD.

[nzshooter]

I removed it from my bolts using a buffing wheel. Worked well

[CharlieNC]

Dremmel and Flitz

[jonbearman]

It is lazered in or etched and it should come off easily,why do you want to take it off?

[RP12]

It is lazered in or etched and it should come off easily,why do you want to take it off?
I think it looks tacky.

[Raydee38]

I polished my bolt and left the etching on the bolt. It is faded and not real bold like it was from the factory. I actually like the way it looks now.

[big honkin jeep]

A green Scotch Brite pad like found with the dishwasing supplies at the grocery store will take it right off. I've done a couple. Heck they take a tiny amount of metal too and I have even used them to remove scratches from a target crown on stainless. A little more aggressive than they appear. They are very useful tiinker/gunsmithing tools if used properly.

[RP12]

Ok, it's off. A scotch brite pad followed by Flitz. It looks great, thanks guys.:thumb: