View Full Version : Name removal ?
How do you get the name and logo off the bolt body ?
missed
11-19-2013, 04:02 PM
Send it to sss for a fishnet flute job.
I think its a nitride coating, you could re nitride or blue it or just sand it down, but that metal is HARD.
nzshooter
11-19-2013, 04:56 PM
I removed it from my bolts using a buffing wheel. Worked well
CharlieNC
11-19-2013, 06:14 PM
Dremmel and Flitz
jonbearman
11-19-2013, 08:32 PM
It is lazered in or etched and it should come off easily,why do you want to take it off?
It is lazered in or etched and it should come off easily,why do you want to take it off?
I think it looks tacky.
Raydee38
11-19-2013, 09:00 PM
I polished my bolt and left the etching on the bolt. It is faded and not real bold like it was from the factory. I actually like the way it looks now.
big honkin jeep
11-19-2013, 11:32 PM
A green Scotch Brite pad like found with the dishwasing supplies at the grocery store will take it right off. I've done a couple. Heck they take a tiny amount of metal too and I have even used them to remove scratches from a target crown on stainless. A little more aggressive than they appear. They are very useful tiinker/gunsmithing tools if used properly.
Ok, it's off. A scotch brite pad followed by Flitz. It looks great, thanks guys.:thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.