thomae
11-09-2013, 09:07 PM
Here are some references from mil-rad.com to use to determine what scope ring height to use:
All links used with permission of the mil-rad.com site owner.
Here is a Scope Ring Height and Clearance Calculator (http://www.mil-rad.com/scope_ring_calculator).
If you are using a rail that is not a 0 MOA rail, you will want to know how much that will affect the height or the objective bell this Scope Mount Cant Offset Calculator (http://www.mil-rad.com/scope_cant_calculator).
In addition, Here is a list of some scopes and their outer tube, objective bell, and ocular bell outside diameters (http://www.mil-rad.com/scopes), as well as diameters and heights of Badger, Seekins and Spuhr tactical rings (http://www.mil-rad.com/rings).
From the Burris Optics website, here is a list of Burris Signature Zee Ring heights (http://www.burrisoptics.com/sigrings.html)(Note that the burris measurements are to the bottom of the inner ring, and the mil-rad.com measurements are to the center of the ring)
All links used with permission of the mil-rad.com site owner.
Here is a Scope Ring Height and Clearance Calculator (http://www.mil-rad.com/scope_ring_calculator).
If you are using a rail that is not a 0 MOA rail, you will want to know how much that will affect the height or the objective bell this Scope Mount Cant Offset Calculator (http://www.mil-rad.com/scope_cant_calculator).
In addition, Here is a list of some scopes and their outer tube, objective bell, and ocular bell outside diameters (http://www.mil-rad.com/scopes), as well as diameters and heights of Badger, Seekins and Spuhr tactical rings (http://www.mil-rad.com/rings).
From the Burris Optics website, here is a list of Burris Signature Zee Ring heights (http://www.burrisoptics.com/sigrings.html)(Note that the burris measurements are to the bottom of the inner ring, and the mil-rad.com measurements are to the center of the ring)