View Full Version : improve stock stock
dey59
10-29-2013, 10:42 PM
I have a savage model 10 fpsr what can I do to improve the stock stock not accu stock .. pillar bedding , v block or anything I've read you should float the tang . any tips or tricks . thanks a lot
stangfish
10-29-2013, 11:00 PM
What problems are you having?
big honkin jeep
10-30-2013, 01:15 AM
A 10 FPSR should be in a pillar bedded stock if it's a factory unit correct? You may try epoxy bedding it to ensure a perfect mating surface between the stock and the action. If flex is an issue then possibly try one of the stiffening methods some of the guys here use. Personally I've never really had a problem with "stock flex"
dey59
10-30-2013, 08:03 AM
no real problem just wondering if there was any room for improvement like floating the rear tang
If it's not floated, then yes it will help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.