View Full Version : Extractor ?
My extractor is copper colored, is that the old style ? Does the new style work better ? Also, what's the reason for a larger detent ball ? :confused:
mudpig
10-29-2013, 05:26 PM
Yes....the copper colored are the old style. The new ones are black and supposedly they are a little better....longer I believe. The larger detent ball gets rid of some of the float experienced by the smaller ball creating a better/stronger bite on the case rim.
Where do I find one without paying outrageous shipping costs ? Also how do you take it out ?
I need a place to order a new style extractor and a ejector retaining pin from. If you have PN's that would be great.
http://www.gunshack.com/index.php?route=product/product&path=25&product_id=645
Give them a call, they might have single parts also
Good folks to deal with
Jack
I figured out how to get it out and back in. What larger size detent ball are you guys using ?
thomae
10-29-2013, 08:53 PM
.140 dia
Jack9/64th inches, if you are looking at fractional sizes.
Thanks Thomae
I did not even think about fraction size!
Jack
Thanks thomae, good to know.:smile-new:
BillPa
10-30-2013, 09:03 AM
I need a place to order a new style extractor and a ejector retaining pin
You can order those parts directly from Savage. My last order for three each extractors, ejectors and ejector springs was $33.00 including shipping. They were at my door in three days.
https://store.savagearms.com/partfinder/
One other tidbbit. When you get ejectors directly from Savage you'll receive the new style with the follower. You may receive the old style from other vendors. I also highly suggest using a new spring when replacing the ejector with the new style.
Bill
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.