View Full Version : Savage 220: 220 Slug Gun Stock Options
birdog
10-29-2013, 09:43 AM
What are the aftermarket stock options for my 220 slug gun? I would really like to get rid of the flimsy Savage stock.
rjtfroggy
10-30-2013, 11:52 AM
Right at the moment I don't think there are any. Thats is not to say you can't make one work. I am just finishing up a Boyd's laminate LA dbm stock to fit mine, it takes a lot of sanding for the barrel to fit and a little fitting for the bottom metal but it does work.
I ended up cutting about an inch off the forend to make the sanding go better(was getting thin at end) and the bottom metal has a 1/2" gap in the front but strength is still there. I have shot it and Federal true ball or Lightfeild sabots shoot the best so far, little over 3/4" @ 75 yards.
When I find some time I'll post a picture.
J.Baker
10-30-2013, 12:01 PM
Might check with sharpshooter here on the forum. I think he has a specific CNC program written up for the 212/220 inlet, but I'm not 100% sure.
rjtfroggy
10-30-2013, 12:43 PM
Too late for me but I took a $100 gamble and got it to work.
birdog
10-30-2013, 06:54 PM
Thanks everyone. I know Mcmillan is an option but I was hoping for something cheaper than what i paid for the gun!
Gunbutcher
11-10-2013, 03:09 AM
Check my post in other thread below about 220 stocks. It may take a day or 2 to be approved.
birdog
11-11-2013, 12:41 AM
Check my post in other thread below about 220 stocks. It may take a day or 2 to be approved.
Will do. Thank you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.