93 Feed and Extraction Probelm

[bigfish27]

http://i1328.photobucket.com/albums/w531/m_turbett/IMGP1975_zpsa89c58cc.jpg
How do I correct this?
This is a 93 BSEV. It prevents extraction.
I bent the magazine guide rod and extraction worked. But then the rear of the case blocked the bolt from moving forward.
I use a hammer to bend the guide so it is a lot of tryout.
I donot remember seeing this probelm posted anywhere.
Thanks
Marlin

[bigfish27]

Looks the thread editor can't post from local disk.

[thomae]

http://www.savageshooters.com/showthread.php?20418-The-ultimate-guide-to-posting-pictures-so-easy-a-caveman-can-do-it!

[bigfish27]

OK. Photo uploaded.
Suggestions?

[gsperaz]

http://i1328.photobucket.com/albums/w531/m_turbett/IMGP1975_zpsa89c58cc.jpg
How do I correct this?
This is a 93 BSEV. It prevents extraction.
I bent the magazine guide rod and extraction worked. But then the rear of the case blocked the bolt from moving forward.
I use a hammer to bend the guide so it is a lot of tryout.
I donot remember seeing this probelm posted anywhere.
Thanks
Marlin

Looks like the front edge of the magazine or clip needs to be filed or ground down for clearance...I had one like that took a file to it , problem solved.

[bigfish27]

I think I will try using some washers between the receiver and guide bracket. It looks like the magazine needs to be lower 60 - 100 thou.
I prefer this to filing. This should have worked at Savage, the hardware in the gun.