PDA

View Full Version : Accu riser ?



RP12
10-06-2013, 04:29 PM
I just ordered the ambidextrous adjustable model. Now I just wonder if anyone here has one, and if they like it or not ? Now is a good time to ask, right ?:p

blvedere
10-09-2013, 07:37 PM
What are you referring to?

RP12
10-10-2013, 12:48 AM
It's called an Accu- riser, it raises the stock up to a monte carlo style. I looked in the picture post, but didn't see any on any ones guns, so I guess I'll be the first to try one.

blvedere
10-10-2013, 01:17 AM
The only Accu-riser I know of is sold buy " ernie the gunsmith" and is used to epoxy bed an action.

RP12
10-10-2013, 07:34 AM
The only Accu-riser I know of is sold buy " ernie the gunsmith" and is used to epoxy bed an action.I think you mean Accra-glass. Wow, I didn't think I was the only one to ever hear of this thing. "Google" is your friend.

thomae
10-10-2013, 09:22 AM
http://www.accu-riser.com (http://www.accu-riser.com/)

Looks interesting. I've never used one, but when you get it installed, please let us know how it works and any pros and cons you figure out.

blvedere
10-10-2013, 09:50 AM
Accu Risers = Consistant Rifle Accuracy
Convert your aluminum bedding block stock to the more accurate pillar bedding system.
Remington M-700 Sendero, Remington M-700 Varmint Synthetic Fluted,
Remington M-700 Varmint Synthetic Stainless Fluted, H-S Precision Pro-Series 2000, and Winchester M-70 in an H-S Precision or a Bell & Carlson Medalist stock.
Note: Accu-Risers are not suitable for use in the HOGUE brand stocks with aluminum bedding blocks.

Item #405 Email: erniethegunsmith@yahoo.com

RP12
10-10-2013, 11:18 AM
OK, blvedere I get it, but that's obviously not what I'm referring to. (Convert your aluminum bedding block stock to the more accurate pillar bedding system) really ?

LoneWolf
10-10-2013, 11:28 AM
I looked at one of these when I was looking for a riser, but found the Karsten to look better on most rifles and it's adjustable for about the same price if you get a "blemished" model.

RP12
10-12-2013, 04:01 PM
Don't waist your money. If this thing is supposed to fit on a stock, the company never tried to put it on one. Way to narrow, to short, just a P.O.S. all together. Fair warning. I tried to fit it some how, so now I can't send it back either, big mistake.

RP12
10-12-2013, 05:30 PM
I tried to make it work but no way. The holes for the screws were even to small. I ended up pitching it. Live and learn.

Neo2savage
10-27-2013, 11:52 AM
Thanks for the warnings, I was looking at them too. So, what's a good cheek weld product for an Accu-Stock that does not require punching holes in the stock?

LoneWolf
10-27-2013, 11:56 AM
Look at the Choate products. Without drilling for install you're limited to the sleeve type or a diy project.

Sent from my HTCEVOV4G using Tapatalk 2