Modify Whidden Staggerfeed V-Block for Centerfeed Blind Mag?

[Beekeeper]

Has anyone modified a Widden V-Block made for the staggerfeed mags to work with a centerfeed gun? It looks like the Whidden V-Blocks are not made for the centerfeed guns--unless I'm wrong about that. I'm not sure if I'd just have to mill out the magazine hole on the V-Block to work with the centerfeed blind mag or what I'd need to do to fit it. Anyone using this block in their savage centerfeed?

[Skeet_man]

..

[GaCop]

I'd like to know too. John's shop is south of me near Valdosta and I've been considering trying his V block set up on my short action center feed 223.

[missed]

Screw spacing is different. You would wind up with a slot instead of a hole. I built mine, I talked to John about making them a production item and it's not high on the priority list.

http://images.tapatalk-cdn.com/15/05/11/403d550e525526876bdf41ebd708c072.jpg

I originally wanted to have it long enough to go to the trigger guard screw and past the front of the recoil lug. But the piece of AL I had on hand worked. Next one I build will be full length and have the drop box bottom metal integrated into it.

[GaCop]

Screw spacing is different. You would wind up with a slot instead of a hole. I built mine, I talked to John about making them a production item and it's not high on the priority list.

http://images.tapatalk-cdn.com/15/05/11/403d550e525526876bdf41ebd708c072.jpg

I originally wanted to have it long enough to go to the trigger guard screw and past the front of the recoil lug. But the piece of AL I had on hand worked. Next one I build will be full length and have the drop box bottom metal integrated into it. You do some beautiful work, congratulations!

[missed]

Thanks! If there was enough interest I am sure I could finish the cam paths and see how much it would be to get some cranked out on the CNC. Manual milling takes a few hours per piece.