PDA

View Full Version : Can a 110 DBM owner help me out?


JimTh
09-29-2013, 07:52 PM
I'm trying to determine if the bottom metal on my 220F has the same outside dimensions as the bottom metal on a 110. Could someone measure the total outside length of the magazine portion and let me know what it is? Don't measure the triggerguard, just the max outside length of the frame the mag goes through.

Thanks,
Jim

Trying to add pictures:
https://scontent-b-atl.xx.fbcdn.net/hphotos-prn2/1238061_1422812604606372_1470595916_n.jpg

https://scontent-b-atl.xx.fbcdn.net/hphotos-prn2/1234587_1422812361273063_1520678364_n.jpg
stangfish
09-29-2013, 08:19 PM
What are the dimensions of the inlet it needs to fit in?
stangfish
09-29-2013, 08:27 PM
Also after reading your other post I was curious about the action screw spacing. did you know the camo version uses a slightly better stock?
stangfish
09-29-2013, 08:31 PM
http://www.shotgunworld.com/bbs/viewtopic.php?t=283858
JimTh
09-29-2013, 10:31 PM
Max outside dimensions: 5.8" x 1.4".

I checked, my black stock is identical to my camo stock.
sharpshooter
09-29-2013, 10:39 PM
The bottom metal for the 220 is completely different from a 110. The mag opening for the 220 is the same as for a short action, but the screw spacing is for a long action. The placement of the mag well is totally towards the rear to make room for the long feed ramp.
JimTh
09-30-2013, 08:03 AM
Sharpshooter,
Are you saying that the 220 uses bottom metal with a long action length but a short action magazine opening? If so, I should be able to drop my 220 bottom metal into a Boyd's stock that's inlet for a 110, right?
JimTh
09-30-2013, 08:12 AM
Stangfish,
I've seen that thread before. McMillan is just not an option for me with their price tag. I don't want to double the cost of the gun with a new stock.
JimTh
10-07-2013, 03:50 PM
Maybe someone could measure the dimensions of the green rectangle on a 110 stock for me? This is a bit easier than taking off bottom metal.

http://img546.imageshack.us/img546/7818/3hfo.jpg
stangfish
10-07-2013, 06:17 PM
Jim, read this one more time.



The bottom metal for the 220 is completely different from a 110. The mag opening for the 220 is the same as for a short action, but the screw spacing is for a long action. The placement of the mag well is totally towards the rear to make room for the long feed ramp.

If your bottom metal is 5.062 screw spacing then it will work on a long action stock like the 110, 111, 112, 114, 116.