PDA

View Full Version : IMR 4350



possum1
02-12-2010, 04:44 PM
Anybody done any load work-up on 55gr. 223 with IMR 4350 ? I understand it's not the best choice, just trying something different.

steveinwv
02-12-2010, 06:19 PM
No velocity with compressed loads. What are you trying to do?

Blue Avenger
02-12-2010, 08:17 PM
80% loads are the best generic starting point.

possum1
02-12-2010, 08:36 PM
No velocity with compressed loads. What are you trying to do?
Just trying some with 223. Loaded 9, 25.0, 25.5, 26.0, none were very accurate. Loaded 25.0 with #41 CCI got .8 at 100yds.

psharon97
02-12-2010, 09:49 PM
26g IMR 4350 Hornady V-Max 55g balistic tip seated at the lands

possum1
02-14-2010, 04:01 AM
Think 26.0 4350 with magnum primer too much ?

psharon97
02-15-2010, 12:28 AM
never tried magnum small rifle. I just use CCI Small rifle primer.

LHitchcox
02-15-2010, 02:50 PM
You can't get enough 4350 into the case to cause a pressure problem.

Three44s
02-20-2010, 12:13 AM
My goto's with a 55 gr. bullet in the .223 are Varget and RL 15.

IMR 4350 in my opinion is much too bulky for such a small case.


Three 44s

Blue Avenger
02-20-2010, 12:20 AM
steves pages say 25 to 26 gr

http://stevespages.com/224_8_55.html

psharon97
02-21-2010, 10:07 PM
Now my favorite load for my 223 is IMR 4198 at 21.5gr bullets just off the lands. works well for me.