Burris Sig. Zee Rings- Thanks All Who Helped...

[Silvercrow1]

FINALLY- I got to actually buy and mount the Burris Sig. Zees on my 110 in .223. A few weeks ago I'd posted that my scope was off- WAY out of alignment. Well several of you suggested the Sig. Zees and today proved once again that, as we used to say in my business; "There ain't no flies on you guys!"

When I finally got the hang of selecting the Pos-Align ring sets -a 20 in the front ring (!), a 5 in the rear,- I got within just under 2" without touching the elevation or windage turrets.

She's a real shooter! Going to post pics tomorrow on the 110 forum, as the rifle now sports a new stock. Even the mechanical centering was made easy by a helpful member!

It poured rain before I could shoot at 100 yards- but at 50 yards the last 3 groups were between .297" and .326". I know they'll open up at 100, but I think as long as I do my part she'll be real good to me!

Thanks again and two thumbs up for Burris Sig. Zee!

Brian

[stomp442]

Best rings made plain and simple.

[Toyoda]

Where can I find 30MM insert's? I am close on my rifle, but not close enough.

[jpdown]

I had to call Burris to get an extra set of 30 mm insert's.

[stomp442]

The 30mm should come with a set of zeros and a set of 10s. To my knowledge they don't make anything above 10 in 30mm at least I have never been able to find any.

[paradactal]

Im looking to buy the same rings. From what Ive found, they come as a kit or just come with the rings by themselves? Should I get the kit or just go with the rings and order the inserts as needed?I really like idea of adjusting the scope with the rings so I have max MOA available

[thomae]

1 inch rings come with 0 inserts, for offset inserts you can buy the inserts individually, or in a set of three, or in a gunsmith pack of a whole bunch.
30 mm rings come with 0 and + .010 inserts and the inserts are not available separately

Reference: http://www.burrisoptics.com/sigrings.html