View Full Version : Bar Magazine mod
auidoshooter
08-06-2013, 10:36 PM
I have a 110 in 3006 that i am using as my range rifle and hunting rifle. I was looking at modifying a BAR mag to fit into the stock bottom metal. has anyone tried this? I have checked all the dimensions and it seems to be feasible.
stangfish
08-06-2013, 10:41 PM
There is only one way you can do this. You must take pictures and post them. You must do a quality job with proffessional naration. Then we will ask that Mr F publishes it as an article on the website.
auidoshooter
08-07-2013, 11:15 AM
Ill do my best. Ill may need to use a mill for a few parts, so that would make it go on the back burner till i get back up to school and have the full machine shop at my disposal.
Current Status: Waiting on the mag from numrich.
RatMag
08-08-2013, 02:30 PM
Yes, it is possible. I cut and welded the bottom of the BAR magazine, to the top of the Savage magazine. I cut and modified the floorplate to utilize the magazine release tab. They work.
DK
fgw_in_fla
08-08-2013, 03:23 PM
Why waste your time with a BAR mag?....
Go for the gusto. Think BIG. Build something that will make the guys at the range say WOW (or maybe "does that guy have a screw loose?")..
I say go for 30 rounds or the heck with it.
http://i1075.photobucket.com/albums/w424/fgwinfla/AK-xis001.jpg (http://s1075.photobucket.com/user/fgwinfla/media/AK-xis001.jpg.html)
Sorry guys. I couldn't resist. In the short time I've been here this topic seems to haunt me.
Where's my meds?....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.