View Full Version : Cut Off Saw?
Appleseed
07-12-2013, 07:47 AM
Shopping for a small bench top cut off saw for shortening .223 brass. Don't want anything that has to be retro-fitted. A good easy to load case holder/vice.
stangfish
07-12-2013, 10:30 AM
http://www.harborfreight.com/bench-top-cut-off-saw-42307.html
You might want to buy some abrasive wheels like these if you don't want the HS sawblade.
http://www.mbausa.com/item.asp?num=MIC84689
Appleseed
07-12-2013, 10:31 PM
Bought a holding jig on 300blkout. Really neat tool. Should adjust for the .221fb. Locking down the work piece and getting a close cut every time was the problem. Any good abrasive wheel will cut now. With fb brass at $50/100 it will pay in the first batch.
thomae
07-12-2013, 11:17 PM
I just got an email this afternoon from Midsouth Shooters that they have primed Lake City 300 AAC Blackout for $34.83/100.
memilanuk
07-13-2013, 12:40 PM
I might have to try some of that stuff... I bought a box of 'Blaster' 300 Blackout 147gn ammo just to get some fire-formed brass (still waiting on my can, so didn't really care if it was sub-sonic or not)... that crap is all over the board on case length, some as much as 0.200" short. So now I'm starting over... :(
stangfish
07-13-2013, 01:31 PM
in the spirit of Thomae... .200 short =>3/16...Wow
Appleseed
07-13-2013, 04:52 PM
For now these will be cut for the .221fb.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.