View Full Version : savage extraction issue
srice425
06-13-2013, 05:33 PM
for some reason my savage 10fp wont thro cartridges very well. happened recently. it used to sling em pretty well, but now it barely drops them to the side. any idea how to improve this?
thomae
06-13-2013, 06:29 PM
Could be your ejector is gunked up. Try squirting some solvent in and working it back and forth...or you could disassemble and clean, then reassemble. If you have been shooting really hot loads, you might have damaged it or the spring as well.
stangfish
06-13-2013, 06:59 PM
^ Ditto
BillPa
06-13-2013, 08:32 PM
for some reason my savage 10fp wont thro cartridges very well. happened recently. it used to sling em pretty well, but now it barely drops them to the side. any idea how to improve this?
Go to the Savage website and order a new ejector (left) and spring. You'll need to enter the rifle's S/N. https://store.savagearms.com/partfinder/
http://i49.tinypic.com/1zppm40.jpg
The follower(tail) helps prevent the spring from distorting like the one on the right and also prevents how far (deep) the ejector can retract preventing over compressing the spring.
Bill
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.