View Full Version : muzzle brake ?
romad97
06-10-2013, 07:40 PM
What is the most common or standard muzzle break thread pattern?
cheapshot
06-10-2013, 09:43 PM
Most .30 calibers are 5/8x24.
bootsmcguire
06-11-2013, 12:41 AM
.224 cals and smaller are normally 1/2-28
24 cal to .284 cals are often 5/8-24 but there are some 9/16-24's out there
30 cal is normally 5/8-24
and above 30 cal is still often 5/8-24 and there are some 3/4-20's out there. I have used 5/8-24 up to .458 cal diameter and worked great.
Savage uses 9/16-28 on their "on/off" adjustable muzzle brakes but for its other non-adjustable brakes uses 1/2-28 and 5/8-24 respectively.
Hope that helps some.
brasse
07-07-2013, 04:48 PM
Thanks for the info. I was looking for the on-off Savage brake, but threads are all wrong
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.