View Full Version : Rimfire Why can I not find a serial # on my 19NRA
NWSavage
06-02-2013, 03:57 AM
I have owned a 19NRA for a while. looking over it, i can not find a serial number on the reciever. nothing on the right side or at the end of the reciever, where many say is where should be located. there is a # on the buttplate in the 15k range, but not sure if it s the original stock.
Anywhere else to look? or did some of them not marked?
sharpshooter
06-02-2013, 05:36 PM
It wasn't required by federal law until 1968, after that every firearm manufactured or imported to the U.S. had to have a serial #.
NWSavage
06-03-2013, 04:10 PM
It wasn't required by federal law until 1968, after that every firearm manufactured or imported to the U.S. had to have a serial #.
you are correct. But according to all the places i have checked, Savage did put serial # on these 19NRA's. either on the reciever or the end of the reciever.
Only thing i can think of is that it might have been removed in the past
J.Baker
06-04-2013, 12:31 AM
Serial # should be on the action between the bolt handle and the ejection port. If it's not then someone ground/polished it off - likely in the process of rebluing it.
Mad Dog
06-07-2013, 09:37 PM
Might be on the inside ring of the receiver as well, I've seen them there on older Savage rimfires.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.