View Full Version : Quick question?
Hi all, so ... How does one remove the pistol grip cap savage emblem thingy off the bottom of an axis stock?
fgw_in_fla
05-17-2013, 08:52 PM
Very carefully. They usually fall off when you really don't need or want it to.
I've used a single edge razor blade to get it started then gently pry with a thin blade screwdriver....
OR..... Tell the rifle & yourself you don't want that emblem to come off. It'll probably fall off & get lost within a few days.
thomae
05-17-2013, 08:52 PM
It is glued on. What worked for me was to simply gently pry it off with a knife edge.
I can't promise that would work for someone else, or that if I did it again the cap might not break.
Thanks. Ran around the grove with razor and popped it off. Now...how to strengthen forward of the pistol grip.
fgw_in_fla
05-19-2013, 06:58 AM
A short piece of aluminum rod or steel rod or even a long bolt & some epoxy. Drill the hole on an angle, coat the rod with epoxy, shove some epoxy in the hole & drive the bolt in.
Sounds easy, doesn't it?
A couple of the guys here have done it. Shouldn't be to awfully difficult.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.