Will a model 112 action fit in a 110 stock

[quarterbore]

I have a single shot 112 action, and I'm looking for a different stock. Will the action drop into a stock that has a blind magazine built for a staggered feed?

[palerider338]

It should......... both are long actions so the screw spacings will be the same......will just have some extra "storage space" where the mag box would have been. If you have the 3 screw Target action then you will probably have to epoxy fill the mag well cut out and bed a pillar for the middle action screw.

[bootsmcguire]

I have a 112R which should be the same as your 112S (R for repeater and S for single shot) and mine will fit any Long Action Staggerfeed Stock. Since yours is a Single Shot, yours will fit almost ANY Long Action Stock because centerfeed and staggerfeed guns both use the 5.062" center-to-center bolt spacing. Just measure your screws and if they are 5.062" then order up the Long Action stock of your dreams.

[243LPR]

You'll probably have to open up the barrel channel for your heavier barrel.Pretty sure 110's are sporter barrels.

[quarterbore]

I'm looking at an aftermarket barrel that has a barrel channel cut for a heavy/varmint barrel