View Full Version : Does anyone know where to buy a single shot loading tray for the 223 Axis???
6x47L Shooter
03-14-2013, 10:46 AM
Been searching, but haven't found anything yet. :confused:
gerard488
03-14-2013, 10:58 AM
I`m looking too
sharpshooter
03-14-2013, 01:56 PM
I have some, I made a few the last run just for the Axis.
6x47L Shooter
03-14-2013, 05:13 PM
I have some, I made a few the last run just for the Axis.
How do I get one? Does it fit in the magazine, or in the bottom of the receiver, replacing the mag?
TIA
Andy
6x47L Shooter
03-16-2013, 11:06 AM
Hello... *Sharpshooter* R U still with us?
N1YDP22
03-23-2013, 06:22 AM
i found one
http://www.midwayusa.com/Product/325484/score-high-bench-rest-single-shot-follower-savage-short-action-223-remington-aluminum
6x47L Shooter
03-23-2013, 10:15 AM
i found one
http://www.midwayusa.com/Product/325484/score-high-bench-rest-single-shot-follower-savage-short-action-223-remington-aluminum
The Savage "short action" is different than the Axis. You may have to "cobble" that follower up to make it fit properly, but then you will have to leave the magazine out.
I want a follower that fits inside the mag like the one for my AR-15.
palerider338
03-23-2013, 01:34 PM
Try this : http://www.sharpshootersupply.com/
6x47L Shooter
03-23-2013, 10:30 PM
Try this : http://www.sharpshootersupply.com/
They only have followers for the long and short actions......not the Axis. I have tried all of those to no avail. Besides, I want to keep the magazine in place!
Dr Honda
03-24-2013, 08:04 AM
http://www.savageshooters.com/showthread.php?104-Forum-Code-of-Conduct
Rule number 6.....you're new here. Please read the rules.
sharpshooter
03-24-2013, 10:30 PM
They only have followers for the long and short actions......not the Axis. I have tried all of those to no avail. Besides, I want to keep the magazine in place!
As I stated before, I made some just for the Axis. These are single shot loading ramps, not followers. Followers will not work in a centerfeed magazine. It sounds like you want a single shot adapter like the Fred Sled to replace the magazine. The Fred Sled only works with the all metal magazines, and will not work in the Axis or the Trophy hunter series.
6x47L Shooter
03-25-2013, 10:36 AM
As I stated before, I made some just for the Axis. These are single shot loading ramps, not followers. Followers will not work in a centerfeed magazine. It sounds like you want a single shot adapter like the Fred Sled to replace the magazine. The Fred Sled only works with the all metal magazines, and will not work in the Axis or the Trophy hunter series.
What I DON'T want is to leave the mag out.....maybe I can just install the mag bottom to cover the gaping hole in the stock. Then your "loading ramp" will probably work. How do I get one of yours?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.