View Full Version : Action wrench??
ICUDIEN
01-14-2010, 12:01 AM
Ok I hear about a Wheler action wrench but is it for Savage only or "Universal"?
Nick
trappst
01-14-2010, 12:06 AM
Wheeler Action Wrench #2 fits Savage and Rem 700
http://www.midwayusa.com/viewProduct/?productNumber=710783
docsleepy
01-14-2010, 12:06 AM
trappst has it
ICUDIEN
01-14-2010, 12:10 AM
Thanks guys now another question: Is it hard on the finish?
trappst
01-14-2010, 12:16 AM
Wrap the action (where the wrench will sit) with a couple layers of blue painters tape. No problems!
Like so:
http://img.photobucket.com/albums/v284/trappst/th_riflebuild019.jpg (http://smg.photobucket.com/albums/v284/trappst/?action=view¤t=riflebuild019.jpg)
http://img.photobucket.com/albums/v284/trappst/th_riflebuild015.jpg (http://smg.photobucket.com/albums/v284/trappst/?action=view¤t=riflebuild015.jpg)
http://img.photobucket.com/albums/v284/trappst/th_riflebuild014.jpg (http://smg.photobucket.com/albums/v284/trappst/?action=view¤t=riflebuild014.jpg)
docsleepy
01-14-2010, 12:17 AM
wished I had thought of that. but I still didn't even scratch it.
ICUDIEN
01-14-2010, 12:43 AM
Thanks fellers for the help and the awesome pictures would i need the barrel vise also?
trappst
01-14-2010, 09:11 AM
Ya don't need it. I already had one so I just use mine as an extra set of hands.
A simple wooden jig to place a barreled action on would be just fine. Should be some pics of such things around here some where.
EFBell
01-14-2010, 09:21 AM
BillPA built himself a nifty yet simple wood block setup. There were some pictures floating around somewhere.
bsekf
01-14-2010, 10:50 AM
Somebody...Anybody Please find the pictures and post them.
Bill
Somebody...Anybody Please find the pictures and post them.
Bill
There is a similar thread on the next page. I'll bump it.
Bob
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.