Custom axis stock

[viper9]

I just got an axis 223 for Christmas love the gun but the stock sucks and with no aftermarket stocks I decided to make my own. I found this site and saw bobfortier's post about building his (which helped a lot thanks) so I thought I would show my build.
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-281224_edited-1_zps95b8b2c3.jpg

I laminated three sheets of 3/4 inch birck ply

http://i1285.photobucket.com/albums/a586/wraith0187/axis3_zpsd444ab44.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28194304_zps62254123.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28122611-2_zps0434ef77.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204723_zps9bd5d082.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204740_zpscee8f064.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28162117_zpsefc1d283.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/finishedsavageaxis_zpscea1b5f6.jpg

I never made a stock before so I used a 2x6 to figure out the shape and I don't have a mill so this was all carbide burrs and chisels. So tell me what you think or how I can make a better one.

[bobfortier]

Nice work , glad to see others are getting their hand on chisels and making wood dust ! If you want to get the best out of your new stock, pillar-bed it with Devcon, it will be a very nice shooter I'm sure of it. Nice work, way better than the first stock I did

[viper9]

Thanks, how do you bed it with the tang setup on the axis?

[bobfortier]

I put a lot of release agant on the recoil key, I insert it into the groove, and I bed the action like normal. Once this is done if you plan on removing the key you need to remove it from the stock, if not leave it right there...

[RSG]

viper9 Nice start welcome to the world of axis stock making. Did you paint the stock?
RSG

[viper9]

thanks RSG and yes I painted it with a textured tan paint.