viper9
02-02-2013, 11:51 PM
I just got an axis 223 for Christmas love the gun but the stock sucks and with no aftermarket stocks I decided to make my own. I found this site and saw bobfortier's post about building his (which helped a lot thanks) so I thought I would show my build.
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-281224_edited-1_zps95b8b2c3.jpg
I laminated three sheets of 3/4 inch birck ply
http://i1285.photobucket.com/albums/a586/wraith0187/axis3_zpsd444ab44.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28194304_zps62254123.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28122611-2_zps0434ef77.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204723_zps9bd5d082.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204740_zpscee8f064.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28162117_zpsefc1d283.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/finishedsavageaxis_zpscea1b5f6.jpg
I never made a stock before so I used a 2x6 to figure out the shape and I don't have a mill so this was all carbide burrs and chisels. So tell me what you think or how I can make a better one.
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-281224_edited-1_zps95b8b2c3.jpg
I laminated three sheets of 3/4 inch birck ply
http://i1285.photobucket.com/albums/a586/wraith0187/axis3_zpsd444ab44.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28194304_zps62254123.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28122611-2_zps0434ef77.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204723_zps9bd5d082.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-30204740_zpscee8f064.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/2013-01-28162117_zpsefc1d283.jpg
http://i1285.photobucket.com/albums/a586/wraith0187/finishedsavageaxis_zpscea1b5f6.jpg
I never made a stock before so I used a 2x6 to figure out the shape and I don't have a mill so this was all carbide burrs and chisels. So tell me what you think or how I can make a better one.