DBM wood stocks / none?

[derrelw]

Brasse stated that his is a non-accustock model like yours, so it will work, just a straight drop-in.

Where is it stated that Brasse started with a non Accustock?

[brasse]

The Savage model 16 Creedmoore is non accustock, with accutrigger and DBM

[Geo_Erudite]

Where is it stated that Brasse started with a non Accustock?

I asked him via PM, I have an accustock model 16. The Savage Model 16 Trophy Hunter XP is non-accustock, which is what Brasse must have.

[derrelw]

Thanks. I still can't tell if my action will "drop in" or not.

[brasse]

It will drop in.

[Appleseed]

brasse, what taper barrel is yours shown in the stocky's thumbhole, wondering if a standard sporter barrel would be too small? Guess stocky's got tired of saying no to savage shooters wanting the det/mag. They are nice stocks, found my last one to be kind of short however.

[derrelw]

Hey Brasse was your factory front takedown screw long enough? I got my new stock Friday and the rear screw fits fine but I can only get 1 or 2 threads caught on the front and the barrel isn't centered in the barrel channel.

[brasse]

you have to take off the metal rings that are used in the plastic stock. You also have to be VERY carefull not to tighten too much as you can warp the wook stock.

Iff you screw in the stock screws too much you can prevent the bolt from moving.

[derrelw]

Thanks! I'll give it a try.

[derrelw]

you have to take off the metal rings that are used in the plastic stock. You also have to be VERY carefull not to tighten too much as you can warp the wook stock.

Iff you screw in the stock screws too much you can prevent the bolt from moving.

Well I can't find the metal rings you speak of on my rig. I think I'll wind up sending back or maybe I"ll skim bed it if I can find the time.

[nick4blu_81]

http://www.stockysstocks.com/servlet/the-652/Varmint-Thumbhole-Savage-10/Detail

I have a Savage Model 111 Hunter xp (7mm) with detachable magazine. Will the above referenced stock work for me? Im a newb. Any help would be appreciated.

[Gunslinger One]

Carvera,
Thanks for the website. Didn't know Byod's had these...

[nick4blu_81]

Found it and ordered it. Contacted Boyds and they have only been available for three weeks now. Even though they show out of stock, you can still place your order.
http://www.boydsgunstocks.com/product.htm?pid=19205&cat=1220#

[Tarheelpwr]

Boyds just started offering the DBM option middle of last month.

[Camar068]

Had mine on order for a week. The custom options weren't available when I ordered but all I needed was a recoil pad. It's cheaper by $6 if you order it separately and install it yourself. No biggie. For the featherweight they said it needs the small pad. When I get my order in if it doesn't fit I'll post.