can not find a stock for my stevens la 30-06 centerfeed. :( HELP!!!

[Stevens M200 30-06]

guys i can not find a nice stock thats better then this pos 20$ stock.

MY GUN IS A stevens/savage 110, LONG ACTION, CENTER FEED 5.somthing STOCK>

ANYone got any sights that sells a stock?? not looking for some 500$ stock, looking for more the 100-250$ area

[pdog06]

http://www.stockysstocks.com/servlet/the-SAVAGE-CENTERFEED/Categories

[Stevens M200 30-06]

it jsut says savage 110 long action. does that mean it will work with my center feed? it does not specify witch one it is.

[EdKin]

Yes same action.

[Stevens M200 30-06]

its not the action. it needs to be a center feed new style. iv looked it up and it clearly states only older style non center feed action.

like i said. there are no stocks for a CENTERFEED NEW STYLE !110!!!!

[Stevens M200 30-06]

unless you can prove me wrong with info. alls it says is save 110 long action blind mag. does not state center feed or stagger feed....

[Stevens M200 30-06]

http://www.stockysstocks.com/servlet/the-33/medalist-aluminum-bedding-block/Detail

scroll down to rifles the stock fits and alls it says is savage 110 long action blind mag. does that mean its for a stagger feed? or center feed???

[bower4311]

What about a stockade stock? You can get a rough finished stock for 200, thumb hole or regular. The tactical ones are 260 unfinished. I figure it wouldn't cost more than 25 bucks to fill pin holes, sand and paint one. Only downside is wait time which is around 16 weeks but a very very good stock for the money. Just search stockade stocks and you'll find 95% good reviews.

Sent from my Galaxy Nexus using Tapatalk 2

[keeki]

Go to Boyd's home page and fill out the make of your gun. They have Stevens la centerfeed stocks

[rjtfroggy]

Here is an idea. Use the telephone and call Boyd's or Stocky's and ask to be sure.

[J.Baker]

Looky in the upper left corner of the page at the Stocky's link (http://www.stockysstocks.com/servlet/the-SAVAGE-CENTERFEED/Categories) above. See where it says "Stocky's Stock Finder?"

Select "Savage" in the first menu
Select "110 through 116 centerfeed" in the second menu
Select your barrel contour in the third menu
Select your magazine type in the fourth menu

Why yes, it's that simple - so easy a caveman could do it! :thumb:

[Speedrat1]

Boyds new websit is a little aggravating IMO but you're not going to bead them on price.... you can get most anything you want finished for right at $100. Usually only very minor fitting required.

[Stevens M200 30-06]

mrfurious ino how that sight works. im not stupid. i hear boyds arnt a improvment over the original stock tho......

[Bigdave1977]

Dude, almost ANYTHING is an improvement over the factory stevens stock, especially a boyds stock after you bed it.

[geargrinder]

its not the action. it needs to be a center feed new style. iv looked it up and it clearly states only older style non center feed action.

like i said. there are no stocks for a CENTERFEED NEW STYLE !110!!!!

About 10 minutes with a dremel will make any stagger feed stock work with a center feed. All you need to do is inlet the rear action screw for the magazine retention tab.