PDA

View Full Version : Show Your Custom Rifle Pics



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [33] 34 35 36 37 38 39 40 41 42 43

RatMag
12-07-2014, 10:28 PM
The lowest node was from 38.5, then opened up a bit before getting to 40.5. I began running the higher grains, and got to 42.1 before I stopped trying. It was on it's way to tightening up again, but I really hate pushing that hard. I don't know what the velocity was at the 42.1 grains, as my buddy shot my chrono. It was easy for me to settle on the 40.5 with how good it was shooting, but it also matches what my wife's .243 really likes. It just makes it easier to not have to remember a bunch of different charges. I also appreciate the definite lack of recoil impulse, as my hamburger shoulder really hates it now.

As far as the Element vs. MCS-T battle goes, it came down to a matter of bedding. I have spent a lot of time and money, and Manners makes an awesome stock!! However, dealing with bedding over and over again, switching back and forth between hunting and target rifles, and not wanting to destroy a stock to change things around, I just decided on the chassis. The Manners, IMHO, is the best overall stock out there as far as a conventional stock goes. I love the ergonomics, and even though the MCS-T is their cheapest stock, it is not lacking at all.

Now enters the time of the Element. I can't say enough good things about this stock. The overall adjustability of the stock is incredible!! I am not an easy fit, but the Element fits me like a glove. Not to mention that XLR Industries is not too far from me. Kyle was a super dude to deal with, and asked me a bunch of questions and outfitted my stock to my particulars. It was also very nice to see how many different chassis for so many different rifle manufacturers... IN STOCK!! Mine was literally ready to go within 10 minutes. I am sure that it really only took that long, due to he is such a good guy to talk about all things guns!! I honestly can't recommend them highly enough!!

DK


http://i187.photobucket.com/albums/x308/z71rat308/IMG_1418_zpsc6d02dfc.jpg (http://s187.photobucket.com/user/z71rat308/media/IMG_1418_zpsc6d02dfc.jpg.html)

OK, here she is as of now... at 18"!! I ran the numbers, and after losing 4-1/2", she is currently running 2750fps. I am borderline on my stability numbers, so I will probably be chasing after that high node after all. So far though, I am really lovin this rifle!! Super easy to shoot, load for, carry, and maneuver around obstacles.

http://i187.photobucket.com/albums/x308/z71rat308/Anna4_zpsc946506a.jpg (http://s187.photobucket.com/user/z71rat308/media/Anna4_zpsc946506a.jpg.html)

bailagent100
12-07-2014, 11:39 PM
http://i48.photobucket.com/albums/f233/bailagent100/IMAG0088.jpghttp://i48.photobucket.com/albums/f233/bailagent100/IMAG0087.jpghttp://i48.photobucket.com/albums/f233/bailagent100/IMAG0084.jpg

RatMag
12-08-2014, 11:47 AM
Nice rig Brother!!

DK

2scars
12-08-2014, 02:51 PM
I want a rifle on a tripod:(

bailagent100
12-08-2014, 03:04 PM
Thanks for the comments, DK.

By way of explanation for the viewers, the 3 pics above, are of my Savage .308, FLCP-K. I spent the last couple years getting it set up the way I wanted and the most recent change brings her to the "mostly done" stage.

Some of the components I have assembled include the SWFA SS HD, illuminated 5-20x50 scope, SWFA cat tail, Vortex bubble level, TAB Gear sling, Harris bi-pod, Glades Armory extended bolt handle and XLR's Element chassis.

The chassis was Cerakoted in burnt bronze, last week by the 'smith at my LGS.


Bailagent100

Alleycat72
12-11-2014, 08:22 AM
So it's not a Savage.


http://i830.photobucket.com/albums/zz229/alleycat72_bucket/Mobile%20Uploads/20141210_155349_zps09b521e4.jpg (http://s830.photobucket.com/user/alleycat72_bucket/media/Mobile%20Uploads/20141210_155349_zps09b521e4.jpg.html)

Royce 618
12-12-2014, 02:36 PM
http://i40.photobucket.com/albums/e229/Royce618/Creedmoor_zps505011f9.png (http://s40.photobucket.com/user/Royce618/media/Creedmoor_zps505011f9.png.html)

Started Life as a Savage
Predator Hunter Max-1 6.5 Creedmoor

Manners: MCS-T Stock
Barrel: 6.5 Creedmoor Shilen Select Match Grade 26" 1-8 Twist
NSS: Precision Ground Recoil Lug and Barrel Nut
Glades Amory: Tactical Bolt Handle
Harris Bi-Pod
Dark Eagle Custom: 10 Round Mag.
Viper Vortex: 4x16x44 HS-T MOA/MOA
Vortex Bubble Level
Butler Creek Caps
EGW 0 MOA Base
Warne 30mm Low Rings

Sorry about the small pic.

deerman
01-04-2015, 10:31 PM
Here is my Savage 11 223 rem, with Leupold VX1 3-9x40 , Timney trigger,Weaver Rings and mounts. I painted the stock camo. Was going to bed the rifle, but after some test shooting with American Eagle 50gr kph I decided to leave it alone. What do you think.last 4 shot group is in the bull.7/16moahttp://i1213.photobucket.com/albums/cc468/deerman4/e7504c451613480811ac86985de3e41f_zps14d94b73.jpght tp://i1213.photobucket.com/albums/cc468/deerman4/ba11458b1cb4b476659fd752180055b8_zpsdfabc0d1.jpg

daddyusmaximus
01-06-2015, 02:27 PM
That stock is beautiful.

Praire Shooter
01-10-2015, 11:21 PM
Here is my Savage 11 223 rem, with Leupold VX1 3-9x40 , Timney trigger,Weaver Rings and mounts. I painted the stock camo. Was going to bed the rifle, but after some test shooting with American Eagle 50gr kph I decided to leave it alone. What do you think.last 4 shot group is in the bull.7/16moahttp://i1213.photobucket.com/albums/cc468/deerman4/e7504c451613480811ac86985de3e41f_zps14d94b73.jpght tp://i1213.photobucket.com/albums/cc468/deerman4/ba11458b1cb4b476659fd752180055b8_zpsdfabc0d1.jpg
That as got to be one of the best camo stocks I have ever seen. Great job!

upSLIDEdown
01-11-2015, 02:37 AM
111 Long action
X-Caliber from Jim at Apache chambered in 338 Edge
Boyds Pro Varmint, pillared/bedded
Ken Farrell 60MOA base
SWFA 16x42 for now.

http://i60.tinypic.com/5lc5xu.jpg

http://i59.tinypic.com/k18m8j.jpg

http://i59.tinypic.com/1znpzxg.jpg

http://i57.tinypic.com/2e3ziiq.jpg

http://i60.tinypic.com/2f08wo2.jpg

http://i59.tinypic.com/s689jb.jpg

drybean
01-11-2015, 11:16 AM
Looks great,great Job

Jrtyndall
01-23-2015, 01:54 AM
Savage 111 7mm rem mag
Mcgowen barrel
Mcmillan HTG
http://i.imgur.com/qNUyRDdl.jpg (http://imgur.com/qNUyRDd)
http://i.imgur.com/pHEGSlrl.jpg (http://imgur.com/pHEGSlr)http://i.imgur.com/N7hfzZGl.jpg (http://imgur.com/N7hfzZG)

barrel-nut
01-23-2015, 05:57 AM
Sweet rig! :jealous:

shawnb
01-24-2015, 03:16 PM
Sweet bolt. What kind is it jrtyndall?

Jrtyndall
01-24-2015, 03:33 PM
Glades armory bolt handle cerakoted armor black

buddyle3
01-25-2015, 11:53 PM
This is my Savage 11VT chambered in 308. It's got a 24" heavy barrel with a 1:10 twist. Fitted on top is a set of Leupold mounts and rings with a Bushnell 6-24x40 optic. It sits inside a Bell and Carlson Medalist stock which I modified in order to take the rifle because the stock is meant for blind mags only and I originally had a detachable box mag. I also have a Caldwell bipod attached to the stock. Not much, but I'm a pretty simple person. Form and function for me. I haven't gotten a chance to shoot it with the new stock on it yet, but I shoot hand loaded 168 Sierra Matchkings, 165 Sierra Game Kings, 150 Sierra Spitzers, 178 Hornady AMAX and 178 Hornady Match. I use Federal 210m primers, Federal, Lake City and Winchester brass with IMR4064. Hope you all like it. http://i1061.photobucket.com/albums/t479/buddyle3/20150125_223823_zpsnmpd8myg.jpg (http://s1061.photobucket.com/user/buddyle3/media/20150125_223823_zpsnmpd8myg.jpg.html)

LoneWolf
02-09-2015, 11:04 PM
Shilen DGR short action w/ 20MOA rail
AGW X-Caliber 7 twist 243 win
XLR Element Chassis
Atlas Bipod
APA lil bastxxx gen II brake
Topped with a Vortex Razor 5-20x50

http://tapatalk.imageshack.com/v2/15/02/09/70fa12427661b58684aac8986c4ce233.jpg

http://tapatalk.imageshack.com/v2/15/02/09/4337ba890602a8077a2b60be977e299f.jpg

http://tapatalk.imageshack.com/v2/15/02/09/3ede4e9b70dc60c4ae6d0c3fdebfeca4.jpg

brangus1111
02-10-2015, 01:44 PM
http://i1294.photobucket.com/albums/b618/brandon_michael6/1661122_10205358200982134_7150788666494382539_n_zp s7e278145.jpg (http://s1294.photobucket.com/user/brandon_michael6/media/1661122_10205358200982134_7150788666494382539_n_zp s7e278145.jpg.html)
Savage Model 10 FCP-SR
Vortex Tactical Rings
20 MOA Base
Vortex Viper PS-T FFP 4-16x50
Glades Armory bolt handle
Tac_Pro Cheek Piece
Harris 'S' Bi Pod
Precision Armament M11 Brake
Accu Washer shim kit
(Have a post in 110 forum about the failure of the brake in this pic, check it out. let me know what ya think)

spdu4ia
02-14-2015, 09:52 AM
Just about to order that brake how do you like it?