Show Your Custom Rifle Pics

[campdude]

Very nice! I was very close to pulling the trigger (so to speak). On the hog hunter but opted for the axis SR model instead. Figured I was just keeping the barrel and action so I went with the best price.


I new that was all I would keep too, wanted threaded barrel also.

Thanks guys

[brangus1111]

My First Build!!!! Savage 110 action in 30-06
Choate tactical stock
Shilen SS Select Match Barrel
Rifle Basix Trigger
NSS Lug
NSS Nut
Vortex Viper HS-T 6-24x50
EGW Base
Burris Xtreme Tactical Rings
Harris Bi-Pod
Butler Creek Flip Caps

http://i1294.photobucket.com/albums/b618/brandon_michael6/20140904_162046_zpse4089f5c.jpg (http://s1294.photobucket.com/user/brandon_michael6/media/20140904_162046_zpse4089f5c.jpg.html)
http://i1294.photobucket.com/albums/b618/brandon_michael6/20140904_161829_zps5bb13c16.jpg (http://s1294.photobucket.com/user/brandon_michael6/media/20140904_161829_zps5bb13c16.jpg.html)
http://i1294.photobucket.com/albums/b618/brandon_michael6/20140904_161909_zps5914067a.jpg (http://s1294.photobucket.com/user/brandon_michael6/media/20140904_161909_zps5914067a.jpg.html)

[Rosco]

Looks awesome!!

[scnewt]

Same as my build except I have a cheap Simmons, SSS trigger, and Weaver rings. Thought I'd never see anyone else build a .30-06! Mine shoots under 1/4 MOA with the standard match Shillen. I'd be interested to know if the select match helps.

[Ranger412]

Our match rifles - the black and silver is my son's .223 in a Boyd's Tacticool and the green and gray is my .308 in a modified Bell & Carlson Tactical Medalist. Both stocks had my DIY raised cheek piece mod.

http://www.hunt101.com/data/500/ASUS_-_20140906_141620_2_.jpg

http://www.hunt101.com/data/500/medium/ASUS_-_20140307_164233.jpg

http://www.hunt101.com/data/500/ASUS_-_20140903_185125_2_.jpg

[barrel-nut]

Nice rifles and awesome photography Ranger! DIY-cheek piece looks better than some factory jobs. I'm interested in your methods?

[brangus1111]

Same as my build except I have a cheap Simmons, SSS trigger, and Weaver rings. Thought I'd never see anyone else build a .30-06! Mine shoots under 1/4 MOA with the standard match Shillen. I'd be interested to know if the select match helps.
Im shooting factory ammo now (HSM Trophy Gold 210 Berger VLD) until I can start load development. But im already shooting 1/4 MOA at 200. Will be moving out to 500 next thursday. We'll see how she does. I have the upmost confidence in it. Its more me that im worried about lol

[scnewt]

Im shooting factory ammo now (HSM Trophy Gold 210 Berger VLD) until I can start load development. But im already shooting 1/4 MOA at 200. Will be moving out to 500 next thursday. We'll see how she does. I have the upmost confidence in it. Its more me that im worried about lol
Cool. Mine likes 178 grain Hornady Amax bullets with CCI 200 primers, 57.5 grains of IMR4350, and Lapua brass. I can't recall the seating depth. I don't have alot of components to play with right now and called it quits when I got to 0.235 MOA. I typically load 57 grains instead of 57.5 grains of poweder for hunting/plinking.

[Ranger412]

Nice rifles and awesome photography Ranger! DIY-cheek piece looks better than some factory jobs. I'm interested in your methods?

Posted up the how-to in the Aftermarket Stock section. It was also recently made into an article on the homepage.

[Plowdaddy519]

Ignore the tranny tear down table in the background, but here is my 11VT in .308, I modded the factory stock to hit my hand and face better with a palm swell and raised the cheek rest some
http://i254.photobucket.com/albums/hh112/smokinford07/rifle_zpsa2932339.jpg (http://s254.photobucket.com/user/smokinford07/media/rifle_zpsa2932339.jpg.html)

and here is how it shoots @ 110 yards with the cheap winchester 150gr power points (its favorite factory load that I've tried so far) each block is 1" except the center ones which are 1/4". I shot the 3 shot group , moved my scope down, shot again, moved it over, shot again, called it good.
http://i254.photobucket.com/albums/hh112/smokinford07/group_zps83a1f587.jpg (http://s254.photobucket.com/user/smokinford07/media/group_zps83a1f587.jpg.html)

[foxx]

That looks cool, Plow.

BTW, your work area looks like mine!

And my office isn't usually any better. :)

[Plowdaddy519]

Thank ya Foxx, it definitely fits me better, and I can finally get a decent cheeck weld. And hey, it may be a mess, but it's my mess, I know where everything is haha. (At least, that's what I tell the wife)

[Chrazy-Chris]

https://farm6.staticflickr.com/5589/15303194566_821a28e4e9_b.jpg

Just messing around with some filters and I liked how this one looked. 11VT in 308 that I had cut to 18" and an AR I put together around the DPMS MK12 barrel (5.56).

[spdu4ia]

https://farm4.staticflickr.com/3929/14944016554_5e13c071f5_b_d.jpg

[drybean]

Very nice

[spdu4ia]

Thanks, The one in the back is my newest savage build I'll get better pics of it soon.

[bajeep93]

Here is mine. Not exactly a full custom. Savage 111 300 win mag. Benchmark barrel muzzle brakes and more brake. Nightforce 20 moa base. Killer innovation rings. Weaver 4-20x50 superslam 30mm tube and vortex level. Just got it back from benchmark a few weeks ago http://tapatalk.imageshack.com/v2/14/10/18/f5dcad741c2fdf9770a0fbc37ff9a0c2.jpghttp://tapatalk.imageshack.com/v2/14/10/18/573d8f459cba85abc2e47340d7c0192c.jpg 200 yd group

[drybean]

Looks great

[spdu4ia]

https://farm6.staticflickr.com/5610/15575932822_8455d967ec_b_d.jpg

[drybean]

Outstanding, what cal.