Show Your Custom Rifle Pics

[SlimySquirrel]

Slimysquirrel sorry it took so long to anwser. Havn't been on the internet as of lately. I believe those are medium rings. But Im not certain its been a while since I built that rifle. If you need to find the correct rings do this.

Install your base. Then take a handfull of penies, quarters, washers etc. Put an even amount of them under your scope tube on each side of your turrets. When your amount of Penies, etc is high enough that the scope bell has enough clearance to clear the barrel then measure the thickness of your stack of penies with a micrometer and go to midwayusa.com and look at the rings.

There measurements are from where the ring/base connect to the top of the ring where the scope tube rests on.

Hope this helps

Hey, thanks a heap!

I purchased the Mediums as a mate has the lows on his rig and they are holding down a 6-24X50 he did a measurement for me and we should be ok!

Really looking forward to peering through the Sightron .. Reckon 32X should help me see a touch better...

[223 4 me]

My budget Varmit...stevens 200, with mcgowen 24" 1:9, b&c carbelite stock,kydex cheek rest, $900 clover maker

http://i1087.photobucket.com/albums/j461/2234me/bth_004.jpg

[keefe300]

Here is a picture of my 243 AI Target Rifle I put together, Savage Target action, stocky's laminated stock pillar and glass bedded. action trued and timed by SSS, and the fishnet bolt body, barrel is 27" brux. Also a picture of my targets shot at the local match 100, 300, and 500 yards

http://i1360.photobucket.com/albums/r654/keefe300/IMG-20130615-00394_zps8528009d.jpg (http://s1360.photobucket.com/user/keefe300/media/IMG-20130615-00394_zps8528009d.jpg.html)
http://i1360.photobucket.com/albums/r654/keefe300/IMG-20130825-00484_zpse2749a57.jpg (http://s1360.photobucket.com/user/keefe300/media/IMG-20130825-00484_zpse2749a57.jpg.html)

[LoneWolf]

http://i1281.photobucket.com/albums/a510/PJ0527/1st%20Range%20Trip/Desktop_zpsdbcc9624.jpg[/IMG]

Here's my custom Axis in 308. 5 shot group at 100 was .442

Sent from my AT100 using Tapatalk 2

[AZ_GUN_NUT]

Hey All, Here is my first "totally by me" build. Savage 110 7MM Rem Mag, Choate Stock, Large Bolt Handle, Shilen Match grade bull barrel 26", 20 MOA scope Bases, Vortex HS Scope.
http://i50.photobucket.com/albums/f334/450rydr/70EE0A4D-2ED0-464B-980A-E94BD7791FB3-1301-000000A53BABCA2C_zps7adcb44a.jpg (http://s50.photobucket.com/user/450rydr/media/70EE0A4D-2ED0-464B-980A-E94BD7791FB3-1301-000000A53BABCA2C_zps7adcb44a.jpg.html)
I had originally worked over the factory trigger, and when I went out for barrel break-in, I realized that I had just made a horrible trigger bad, so I ordered and installed a Rifle Basix Sav-1 trigger. I also realized that the stock was in need of bedding, so back to the bench it went. Initial load development showed a couple of loads that showed promise, so I loaded up a few more and a few max loads to try as well, and back out to re-check groups. Here is the winning group. These were just confirming earlier groups, so it was only a 3 shot.
http://i50.photobucket.com/albums/f334/450rydr/B5B49270-D5CF-4AFE-B9D9-B76E6F9F7EB0-1301-000000A54151C8D4_zps868315c6.jpg (http://s50.photobucket.com/user/450rydr/media/B5B49270-D5CF-4AFE-B9D9-B76E6F9F7EB0-1301-000000A54151C8D4_zps868315c6.jpg.html)
I ran the last two through the chrono to get a speed which was 2910fps. I was hoping to get just over 3000fps, but with that group, I think I can sacrifice a few fps. I was shooting prone off of bags. I originally paid $130 for the rifle WITH 4 boxes of ammo.

That's darn good shooting son!

[That1guy]

Here is my LRP post makeover.

Manners T4A
LRP Action
Rock Creek Medium Palma, Muscle brake, 6.5 Creedmoor
Bushnell 6-24x50 FFP, G2DMR

http://i453.photobucket.com/albums/qq258/JDSig08/IMAG0358-1_zps49662fe7.jpg

[3093Andrew]

Savage Axis .308
Barska 10-40X50mm Scope
Weaver Scope Rings and Mounts
Blackhawk Sportster Bipod
Blackhawk Sportster Raised Cheek Piece
Custom Paint(did it myself)
Custom 10 Round Mag

http://i1331.photobucket.com/albums/w586/provost_andrew/012_zps0fe9a125.jpg (http://s1331.photobucket.com/user/provost_andrew/media/012_zps0fe9a125.jpg.html)

http://i1331.photobucket.com/albums/w586/provost_andrew/014_zps54a5cca6.jpg (http://s1331.photobucket.com/user/provost_andrew/media/014_zps54a5cca6.jpg.html)

[timmymic]

Here is my LRP post makeover.

Manners T4A
LRP Action
Rock Creek Medium Palma, Muscle brake, 6.5 Creedmoor
Bushnell 6-24x50 FFP, G2DMR

http://i453.photobucket.com/albums/qq258/JDSig08/IMAG0358-1_zps49662fe7.jpg

what does something like that run for price!!!

[That1guy]

what does something like that run for price!!!

Prefit Barrel from Rock Creek
Stock from Stockys
Brake given to me, $100 to install
Vortex rings
Bushnell scope used for $625
Egw base

Sold the stock and barrel from the used .243 LRP, so Ive only got 350 in the action.

Not too bad really.

Here it is next to my Fclass rig

http://img.tapatalk.com/d/13/09/23/umyvymuv.jpg

[moecarama]

@ That1guy what bipod is attached to your F-class rig?

[That1guy]

@ That1guy what bipod is attached to your F-class rig?

Thats the Duplin Rifles bipod.

http://duplinrifles01.businesscatalyst.com/products.htm

[Alleycat72]

http://i830.photobucket.com/albums/zz229/alleycat72_bucket/20131015_154729_zpseb405599.jpg (http://s830.photobucket.com/user/alleycat72_bucket/media/20131015_154729_zpseb405599.jpg.html)
http://i830.photobucket.com/albums/zz229/alleycat72_bucket/20131015_154433_zps00078be5.jpg (http://s830.photobucket.com/user/alleycat72_bucket/media/20131015_154433_zps00078be5.jpg.html)

[Alleycat72]

http://i830.photobucket.com/albums/zz229/alleycat72_bucket/20131015_154806_zpsd183a5ca.jpg (http://s830.photobucket.com/user/alleycat72_bucket/media/20131015_154806_zpsd183a5ca.jpg.html)

6mm BRX. My 10 year old daughter wanted to shoot 600 yd and 1000 yd F-Class so I called Spook for some gunsmith work and here we go. She already rocks the steel plates at 1000yards.

[moecarama]

@Alleycat72 She's a lucky young lady ;.nicely done with the PDC Stock and front rest mods!

[bodywerks]

That's a nice savage and a lucky daughter! Dig the stock:thumbup:

[Eddie]

Savage 110 L/A 308 (Pre-Accutrigger) "Work in progress"
http://i669.photobucket.com/albums/vv57/shadoiv/2013-05-11185755.jpghttp://i669.photobucket.com/albums/vv57/shadoiv/2013-05-11185740.jpghttp://i669.photobucket.com/albums/vv57/shadoiv/2013-05-11185845.jpg

[308Gunsmith]

My Savage first time at the range. Right out of the box with handloads.
http://i4.photobucket.com/albums/y117/p89ruger/Gun%20Pics/BASShotgroup.jpg (http://s4.photobucket.com/user/p89ruger/media/Gun%20Pics/BASShotgroup.jpg.html)
http://i4.photobucket.com/albums/y117/p89ruger/Gun%20Pics/SavageBAS308win1.jpg (http://s4.photobucket.com/user/p89ruger/media/Gun%20Pics/SavageBAS308win1.jpg.html)

[308Gunsmith]

Savage BSA 308 win.http://i4.photobucket.com/albums/y117/p89ruger/Gun%20Pics/SavageBAS308win1.jpg (http://s4.photobucket.com/user/p89ruger/media/Gun%20Pics/SavageBAS308win1.jpg.html)

[missed]

Nice how do you like the 155 Palma bullet? Have you shot it at longer ranges? What recipe and speed?

[308Gunsmith]

I'll have to look it up, but she likes the 155gr.