Show Your Custom Rifle Pics

[big honkin jeep]

I guess I never got around to putting this one up here. It's a left handed carbine built with mostly parts from the classifieds here. It started as a 111GL in .243. It's now a 16"long cut down sporter barreled 308 with threads and a brake, a detachable box and a shortened up stock converted for lefty.Of course it has a tuned 3 screw trigger with a lighter spring and with a bolt lift kit. The overall length from the tip of the brake to the end of the butt pad is 37" and though I'm not sure what it weighs it's light and handy, The camo is Kahki and olive drab rustoleum camo from a rattlecan with the effects done with a sea sponge and finished with Testors dull coat. The perfect little grab n go gun for things that need shooting.
http://i176.photobucket.com/albums/w188/bighonkinjeep/100_1389_zps0f9eb333.jpg (http://s176.photobucket.com/user/bighonkinjeep/media/100_1389_zps0f9eb333.jpg.html)

[defcon]

.22LR Remington MSR using a Savage MKII F

Licensed by Remington MSR
CNC full metal chassis
Foldable stock, adjustable LOP and cheek riser

Paid $400 used for the airsoft stock and then gutted it using an angle grinder and power drill.

95% done

The trigger doesn't go down all the way so I have to figure out how to fabricate an "extended trigger shoe."

When I figure this part out, then it's range time to shoot some vids.

Using a cheap $60 3x9-50mm scope
UTG M1A bipod
Replaced the bolt knob


http://farm9.staticflickr.com/8255/8752854008_17815ec138_b.jpg (http://www.flickr.com/photos/defcon008/8752854008/)
_MG_7294 (1280x853) (http://www.flickr.com/photos/defcon008/8752854008/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm4.staticflickr.com/3699/8751734197_70a90d9ec3_b.jpg (http://www.flickr.com/photos/defcon008/8751734197/)
_MG_7299 (1280x853) (http://www.flickr.com/photos/defcon008/8751734197/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm9.staticflickr.com/8127/8752852574_573fb038eb_b.jpg (http://www.flickr.com/photos/defcon008/8752852574/)
_MG_7282 (1280x853) (http://www.flickr.com/photos/defcon008/8752852574/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm8.staticflickr.com/7441/8752852426_e04cf490de_b.jpg (http://www.flickr.com/photos/defcon008/8752852426/)
_MG_7285 (1280x853) (http://www.flickr.com/photos/defcon008/8752852426/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm9.staticflickr.com/8411/8751731205_bb9c15a56c_b.jpg (http://www.flickr.com/photos/defcon008/8751731205/)
_MG_7283 (1280x853) (http://www.flickr.com/photos/defcon008/8751731205/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5459/8752852488_9ff59bfd3d_b.jpg (http://www.flickr.com/photos/defcon008/8752852488/)
_MG_7301 (1280x853) (http://www.flickr.com/photos/defcon008/8752852488/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr


http://farm8.staticflickr.com/7424/8752854154_343bcc025d_b.jpg (http://www.flickr.com/photos/defcon008/8752854154/)
_MG_7302 (1280x853) (http://www.flickr.com/photos/defcon008/8752854154/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr


http://farm4.staticflickr.com/3672/8751732503_7727658cec_b.jpg (http://www.flickr.com/photos/defcon008/8751732503/)
_MG_7303 (1280x853) (http://www.flickr.com/photos/defcon008/8751732503/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5331/8751730531_17339cf147_b.jpg (http://www.flickr.com/photos/defcon008/8751730531/)
_MG_7298 (1280x853) (http://www.flickr.com/photos/defcon008/8751730531/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

[efm77]

http://i775.photobucket.com/albums/yy39/efm77/Picture017_zps260d858c.jpg (http://s775.photobucket.com/user/efm77/media/Picture017_zps260d858c.jpg.html)
http://i775.photobucket.com/albums/yy39/efm77/Picture016_zpsec46a0e4.jpg (http://s775.photobucket.com/user/efm77/media/Picture016_zpsec46a0e4.jpg.html)

Just finished this. It's been partially finished for a while but got put on the back burner. It started out as a 116 Big Game Hunter model. I had the action blue printed, and re-threaded to the large barrel shank size. The barrel is a McGowen 28" large shank in 338 win mag. It has a Rifle Basix trigger, Hogue full length bedded stock, Warne base, Burris Signature Zee Rings, and a Swift Premier Sur-Lok 6-18x44.

[maddogg316]

Got her all together guys what do you think?
New .308 dog slayer!!

http://i1197.photobucket.com/albums/aa428/nickvaughn316/2013-06-01112443_zps1dec190f.jpg (http://s1197.photobucket.com/user/nickvaughn316/media/2013-06-01112443_zps1dec190f.jpg.html)

http://i1197.photobucket.com/albums/aa428/nickvaughn316/2013-06-01112526_zps6f3664bd.jpg (http://s1197.photobucket.com/user/nickvaughn316/media/2013-06-01112526_zps6f3664bd.jpg.html)

http://i1197.photobucket.com/albums/aa428/nickvaughn316/2013-06-01112631_zps9a1a6011.jpg (http://s1197.photobucket.com/user/nickvaughn316/media/2013-06-01112631_zps9a1a6011.jpg.html)

[bmurray699]

Just finished the paint job
Model 10p-sr
18" threaded barrel
SWFA SS 10X42 Scope

http://s14.postimg.org/ew4a9snnx/image.jpg (http://postimg.org/image/ew4a9snnx/)

[robin314]

Nothing custom, just a shooter....

Savage 10FP-SR .308
- SWFA Super Sniper 12x42 Scope
- TPS X-Low 30mm Rings
- Weaver One Piece 20MOA Base
- JP Recoil Eliminator
- Karsten Cheek Rest (pending)
- Butler Creek Pop-up Covers
- SWFA Sun Shade (pending)
- Caldwell XLA 6-9” BiPod

http://forum.snipershide.com/attachments/snipers-field-photography/10050d1371766937-guys-how-about-savage-thread-8696_10201444816461476_802492505_n.jpg
and
http://forum.snipershide.com/attachments/snipers-field-photography/10051d1371766939-guys-how-about-savage-thread-931168_10201444814981439_720255482_n.jpg

[SamuraiTrapper]

Hey All, Here is my first "totally by me" build. Savage 110 7MM Rem Mag, Choate Stock, Large Bolt Handle, Shilen Match grade bull barrel 26", 20 MOA scope Bases, Vortex HS Scope.
http://i50.photobucket.com/albums/f334/450rydr/70EE0A4D-2ED0-464B-980A-E94BD7791FB3-1301-000000A53BABCA2C_zps7adcb44a.jpg (http://s50.photobucket.com/user/450rydr/media/70EE0A4D-2ED0-464B-980A-E94BD7791FB3-1301-000000A53BABCA2C_zps7adcb44a.jpg.html)
I had originally worked over the factory trigger, and when I went out for barrel break-in, I realized that I had just made a horrible trigger bad, so I ordered and installed a Rifle Basix Sav-1 trigger. I also realized that the stock was in need of bedding, so back to the bench it went. Initial load development showed a couple of loads that showed promise, so I loaded up a few more and a few max loads to try as well, and back out to re-check groups. Here is the winning group. These were just confirming earlier groups, so it was only a 3 shot.
http://i50.photobucket.com/albums/f334/450rydr/B5B49270-D5CF-4AFE-B9D9-B76E6F9F7EB0-1301-000000A54151C8D4_zps868315c6.jpg (http://s50.photobucket.com/user/450rydr/media/B5B49270-D5CF-4AFE-B9D9-B76E6F9F7EB0-1301-000000A54151C8D4_zps868315c6.jpg.html)
I ran the last two through the chrono to get a speed which was 2910fps. I was hoping to get just over 3000fps, but with that group, I think I can sacrifice a few fps. I was shooting prone off of bags. I originally paid $130 for the rifle WITH 4 boxes of ammo.

[SlimySquirrel]

http://i1346.photobucket.com/albums/p695/hafejd30/DSCN0197_zpse40ce429.jpg (http://s1346.photobucket.com/user/hafejd30/media/DSCN0197_zpse40ce429.jpg.html)

Not a savage but none the less:

S&W M&P lower
DPMS Low pro Upper 5.56
Choate Buttstock
YHM Todd Jarrett Forend
Magpul MOE Grip
Vortex Viper PST 1-4X24

http://i1346.photobucket.com/albums/p695/hafejd30/DSCN0191_zps8b218f3e.jpg (http://s1346.photobucket.com/user/hafejd30/media/DSCN0191_zps8b218f3e.jpg.html)

Savage 12 FVSS .223
Choate Ultimate Varmint Stock
Burris 4.5-14X42 Fullfield II

http://i1346.photobucket.com/albums/p695/hafejd30/DSCN0192_zpsc0b58d67.jpg (http://s1346.photobucket.com/user/hafejd30/media/DSCN0192_zpsc0b58d67.jpg.html)

Savage 10 FCP Action
Criterion 28" 1/10 .308 Bull Barrel/Nss Recoil Lug
HS Precision Stock
Sightron 8-32X56 LRMOA
Leupold Mark 4 Rings
Nightforce 20 MOA Rail
110 BA Bolt Handle
Blackhawk Cheekrest
Harris Bipod
SSS 9 Round Mag

Longest kill: Whitetail Doe 790 Yds

http://i1346.photobucket.com/albums/p695/hafejd30/DSCN0194_zps1bbbf1b8.jpg (http://s1346.photobucket.com/user/hafejd30/media/DSCN0194_zps1bbbf1b8.jpg.html)

http://i1346.photobucket.com/albums/p695/hafejd30/DSCN0195_zps2ef4b145.jpg (http://s1346.photobucket.com/user/hafejd30/media/DSCN0195_zps2ef4b145.jpg.html)

Savage 10 FCP
Savage 24" Factory .308 Barrel
HS Precision Stock with OD/Black Duracoat Skull Pattern
Vortex Viper HS 4-16X44 Deadhold BDC Reticle
Luepold Mark 4 Rings
TPS Steel Base
Blackhawk Cheekrest/Sling
Harris Bipod
SSS 9 Round Mag

Longest Kill: Whitetail Doe 651 Yds

Excuse me kind sir, Could you tell me what heigh those Leupold rings are on the Sightron 8-32X56 please?
I have the same scope and I'm looking for the Rings!

[therichardpowell]

http://i70.servimg.com/u/f70/11/81/01/07/05410.jpg
6.5x55 mcgowen barrel, choate stock, bushnell elite tactical scope.

This thing is sexy...

[Luke.nukem]

Here's one of mine with a typical 5 rd group at 100.
http://i841.photobucket.com/albums/zz338/lucasellis/null.jpg
http://i841.photobucket.com/albums/zz338/lucasellis/null-8.jpg

[devildogandboy]

here's my Savage build in 6.5creedmoor with 26" McGowen barrel, Nikon Buckmasters 6x18x40 scope, Rifle Basix Sav-2 trigger, Tactical Works bolt knob, Choate tactical stock and Blackhawk bi-pod. included 100yd target also.
http://i1202.photobucket.com/albums/bb379/devildogandboy/IMG_0166.jpg (http://s1202.photobucket.com/user/devildogandboy/media/IMG_0166.jpg.html)
http://i1202.photobucket.com/albums/bb379/devildogandboy/65cm--7-05-13--2.jpg (http://s1202.photobucket.com/user/devildogandboy/media/65cm--7-05-13--2.jpg.html)

[Jailcop1964]

http://farm4.staticflickr.com/3778/9278154176_9ba6fd64ac_z.jpghttp://farm6.staticflickr.com/5523/9278154868_aef5fa059f_z.jpg
Here are some before and after photos of my 11VT

[thomae]

Bad link. Would you please post the actual photos?
http://www.savageshooters.com/showthread.php?20418-The-ultimate-guide-to-posting-pictures-so-easy-a-caveman-can-do-it!

[timmymic]

http://www.longrangehunting.com/forums/attachments/f53/23053d1372375884-finally-finished-my-first-long-range-rifle-image.jpg

[bodywerks]

I think you need a taller bipod...

[timmymic]

I use it for sitting when I take it hunting so it's perfect actually

[therichardpowell]

That's a coyote killing bipod right there.

[timmymic]

Haha see this guy knows what he is talking about!!!

[rattfink]

I'm not sure what the definition of "Custom" is but looking through the pics in this thread may fit in and it makes more sense than starting a new thread IMO.

This is my special order 112 FCV I recently took possession of in 30-06.
http://i.imgur.com/Kvd1zmv.jpg

The action and barrel came in a surprisingly dull finish which I really like. I think the action might have been from the law enforcement series as the varmint series looks a good bit shinier on their site but who knows. And Savage didn't have any 26" bull barrels in 30-06 laying around but they did have some 24" barrels. They would have made a 26" had I wanted to but at $200 extra I selected a fluted 24" which I am very happy with.

Bog standard accustock, accutrigger, DBM.

I found some TPS 1" rings on EBay for half their normal cost, and got a Talley rail to go with it.

The Scope is a Zeiss Conquest 4.5-14x50 I got for a steal off of a site that offers large discounts to "industry insiders" in my case, active duty military.

I have 60 rounds of Hornady factory 165 grain rounds and I hope to see how she shoots on Wednesday. Can't wait! I haven't been shooting in awhile and this is my first Savage and first bolt gun.

[hafejd30]

Slimysquirrel sorry it took so long to anwser. Havn't been on the internet as of lately. I believe those are medium rings. But Im not certain its been a while since I built that rifle. If you need to find the correct rings do this.

Install your base. Then take a handfull of penies, quarters, washers etc. Put an even amount of them under your scope tube on each side of your turrets. When your amount of Penies, etc is high enough that the scope bell has enough clearance to clear the barrel then measure the thickness of your stack of penies with a micrometer and go to midwayusa.com and look at the rings.

There measurements are from where the ring/base connect to the top of the ring where the scope tube rests on.

Hope this helps