Show Your Custom Rifle Pics

[oosickness]

Here is my Beater, I just finished Parkerizing the Receiver, bolt handle and ring thing on the bolt. The park looks like garbage but I didn’t have an area to sand blast so I used evaporust…not the best but it worked to some extent.
Boyd’s Prairie hunter
Pac-Nor #4 24” 1x11 chambered 30-06
SS bolt flute
Zeiss Conquest 3-9x40 in the safe
Talley Light weight mounts in the mail
Sorry for crappy Cell pics... the Dslr is with the wify
http://i5.photobucket.com/albums/y169/oOsIcKneSs/bolt4.jpg

http://i5.photobucket.com/albums/y169/oOsIcKneSs/bolt3.jpg

http://i5.photobucket.com/albums/y169/oOsIcKneSs/bol1.jpg

http://i5.photobucket.com/albums/y169/oOsIcKneSs/bolt2.jpg

[heavybarrel]

First time posting here. This is the Savage model 12 BJTV 26" in .223. The rifle is topped with a Leupold VX II 4-12x40 AO scope. (very clear optics) First time out to the range with this one today. Best group at 100 yds, 10 shots into 3/4 inch using 69 grain SMK pushed along with 24.7 grains of W748. I was breaking in the barrel at the same time....(cleaning after every shot) so I know the rifle will do better once I "tweak" the load and cleanup the case necks (turn case necks just enough to cut away any thick spots). Any one else have this model. I would love to know what bullet weight and load you settled on...(lightweight bullets 40-52 grain grouped about 1 inch....."I guess the 1-9 rate of twist").....But I see potential for the heavier bullets..........Don in SC

http://i991.photobucket.com/albums/af36/tailingloop_pics/101_5474.jpg

http://i991.photobucket.com/albums/af36/tailingloop_pics/101_5482-1.jpg

http://i991.photobucket.com/albums/af36/tailingloop_pics/101_5485.jpg

[jhelmuth]

Hey HeavyBarrel... (here is mine)

http://i56.tinypic.com/2cpeqdy.jpg

...and a recent pic of my last target (earlier today actually). 5 rounds - using Federal Premium Gold Medal Match 69gr SMK BTHP...

http://i51.tinypic.com/2gxiwsy.jpg

[cleaky]

After a 4 week wait on my new boyds to get shipped to New Zealand, it's finally here! I'm pretty happy with it but because I pack this thing around the wilderness I'll be lightening it a bit.

Haven't shot it yet, I'll see how it goes as is but eventually it'll get bedded (once the recoil lug gets here).

http://i150.photobucket.com/albums/s105/cleaky/S1020039.jpg

http://i150.photobucket.com/albums/s105/cleaky/S1020035.jpg

[Zero]

Here is a picture of my new baby i got last week!

Savage Stevens 200 in 223 Remington

http://www.shooterscalculator.com/images/savage-stevens-200-223-Remington-small.jpg

[mscott71]

Just finished this one this morning.

http://i66.photobucket.com/albums/h270/mscott_photos/260%20Savage/260001JPG.jpg

Savage short action
26" 8 twist .260 Criterion
B&C stock
10x SS and SS rings
Weaver 20 min base
Eagle stock pack
Form 1 suppressor

[teele1]

Here's my latest.
Savage Model 12 Single shot action, Krieger 29" barrel chambered in 6CM
Savage F/Class stock modified to fit a short action with adj cheek and bottom milled to ride the rear bag better and DuraCoat paint. Pillar and glass bedded with Devcon plastic steel, Farrell 20MOA base, Leupold QRW rings and a
Super Sniper HD 5-20 scope.

http://img830.imageshack.us/img830/3613/6cmf.jpg (http://imageshack.us/photo/my-images/830/6cmf.jpg/)
http://img834.imageshack.us/img834/9259/p1000887e.jpg

[jhelmuth]

Here's my 2nd Savage (model 12 VLP in .243 win)

http://i52.tinypic.com/iba0ck.jpg

[stevsr31]

Hi how do you upload an image to this fourm

[sharpshooter]

go back to the 4th sticky......PICTURE POSTING 101.

[kiwi 99]

http://img.photobucket.com/albums/v358/ernie99/PA240004.jpg

Savage Mod. 12 FS Fluted
Hawke 4-10x44 Mildot
Burris Signature Zee Rings
Gunworks Maximus suppressor

soon to be fitted with a Duramaxx stock if I can get one into NZ.

[Dennis]

I see two suppressors on guns above.

Tell us your likes/dislikes and is the suppressor worth it!

Just wonderng, I do a little pig hunting at night!

[DonArkie]

The rifle used for long range shooting & long range hunting "mainly for them Texas Hogs"

Savage 110E Action: Accurized (receiv faced / bolt-thread, trued bolt body & locking lugs, oversized parallel ground recoil lug
#4 26” 1-10 twist Hart Barrel chambered in 7mm Rem Mag w/ JP Recoil Eliminator Break
Boyd “Ross Thumbhole Stock”, accurized "bedded"
Timney Trigger 2.5 lb
Over-sized Tactical Bolt Knob,
Vortex Viper 1“ tube 4x12x40 side focus w/ Custom Turrets
Burris Extreme Tactical 1” Rings w/ Picatinny Ring Top
Vortex 1” Anti Cant Rifle Scope Bubble Level
EGW Tactical Picatinny Rail Scope Mount Base
3” Under Stock Picatinny Rail w/ UTG Low Profile Tactical Bi Pod 6” to 9”
Metal Finish, Gun Kote Matte Black
Camo on stock: Urban Tactical

Gun work done by Rob Roberts Custom Gunworks, stock & all metal finish work finish by me.


Ammo
Conley Precision Cartridges
7mm Remington Mag. 140 Gr. Nosler AccuBond 3225fps
http://i2.photobucket.com/albums/y19/DonM1/Picture8951.jpg
http://i2.photobucket.com/albums/y19/DonM1/Picture8674.jpg

[titus2423]

http://i112.photobucket.com/albums/n198/titus2423/IMAG0291.jpg

Savage 93R17FV .17 HMR
Mueller APV 4.5-14X40
Weaver #16 bases
1" Burris medium "Zee" rings

http://i112.photobucket.com/albums/n198/titus2423/IMAG0203.jpg

200 Stevens .270
Nikon Prostaff 3-9X40
Burris standard bases
Leupold 1" extension rings

[efm77]

Here's my second of three builds I've done.



http://i775.photobucket.com/albums/yy39/efm77/Picture149.jpg

http://i775.photobucket.com/albums/yy39/efm77/Picture147.jpg

http://i775.photobucket.com/albums/yy39/efm77/Picture146.jpg

http://i775.photobucket.com/albums/yy39/efm77/Picture150.jpg

[SmokinIdahoan]

New to the forum, but not new to Savage. Here are a couple pics:

Savage Axis .223
http://i990.photobucket.com/albums/af30/mattducharme/Photo0657.jpg

Savage Axis .223 (Top - before paintjob), Savage Mod 11 .308
http://i990.photobucket.com/albums/af30/mattducharme/Photo0617.jpg

[moecarama]

Well this build is complete for now :-\ 12FVSS .308 26" , Viper PST 6-24X50 FFP MOA, Burris rings, EGW 20moa Base, SSS Competition trigger 2lb 10oz, SSS bolt handle raw cast, XLR Stock w/ bench rest plate, AICS 5rnd mags.

http://i1183.photobucket.com/albums/x473/moecarama/SDC10097.jpg

http://i1183.photobucket.com/albums/x473/moecarama/SDC10096.jpg

[Ninedv]

Seems i need to update, Ive gotten a few more in the safe since this was started.

This one showed last year. 10fpk in 308.
http://img.photobucket.com/albums/v288/ninedv/IMAG0150-1.jpg

http://img.photobucket.com/albums/v288/ninedv/308groundhoggun.jpg

Then this one decided to show and give the 308 some company.
6mmbr

http://img.photobucket.com/albums/v288/ninedv/pair.jpg

http://img.photobucket.com/albums/v288/ninedv/6br.jpg

Still working on load development: 5 shot
http://img.photobucket.com/albums/v288/ninedv/5hot6br.jpg

And all three before the Br got its rings on her.

http://img.photobucket.com/albums/v288/ninedv/group.jpg


Shoot straight.

[Dennis]

After waiting several months for things to come together, I am finally finished with my FIRST ever complete BUILD!

Savage PTA RBLP action, T&T by SSS, SSS evolution 5oz trigger.

SSS Benchrest stock, with 18 coats of automotive clear to compliment the stain!

McGowen 27" 308 1" to .900" tapered matte barrel, 10 twist

It will have a Nightfore base and rings, sporting a 12x42 BR NP2DD scope!

Many thanks go to Fred & Lisa-SSS, McGowen Barrels, Patrick Kennedy, Randall Nall, and Chris from Sport Optics!

I actually fired it and it WORKED! Setting headspace was a breeze, 1/8 twist until it wouldn't close, tweaked, locked down, put no guage in and bolt wouldn't close! EASY

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC07056.jpg

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC07053.jpg

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC07052.jpg

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC07057.jpg

http://i957.photobucket.com/albums/ae56/Dennis4437/DSC07055.jpg

[moecarama]

Dennis, that is one sweet looking rig; I just might use that color scheme for my next build. 8)