model 10 accu-trigger??

[dangimissed]

after taking the rifle out of the stock,there are no adjusting screws anywhere.It does have the blade in the middle of the trigger,but looks nothing like the photos of a model 10 shown eleswhere on this web site. can I send photos of my model 10 to one of you experts...thx to all in ADVANCE....WEll I had luck.I tuned the accu-trigger to 11 oz. trigger pull.I didnt have the Savage tool ,but I made one..HAPPY HOLIDAYS again THX

[stangfish]

If you bought it new there is a tool to adjust the spring tension. If you are looking for a target pull you will need to cut a few rings off or buy a target spring. If you can find one....

[dangimissed]

I bought this used....there are no screws anywhere for adjusting

[sharpshooter]

There are no screws in the accutrigger. The adjustment for pull weight is the return spring, which turns in and out of the trigger, in a threaded hole. The adjust is made with a special tool that looks a lot like a valve core removal tool. In most cases you can turn the spring with your fingers.