PDA

View Full Version : savage 110 fcp-k



spstacman
12-23-2012, 02:21 PM
sorry if this has been asked already but i could not find it. i have a savage 110 fcp-k 300wm
i would like the replace the accustock for something little tactal but cant figure out which one will work any help out there

Uncle Jack
12-23-2012, 03:51 PM
Where did you get a 110FCP-K in 300 Win Mag?

uj

spstacman
12-23-2012, 03:54 PM
orderd couple years back

Uncle Jack
12-23-2012, 04:03 PM
From a dealer or the Savage Custom Shop?

uj

spstacman
12-23-2012, 04:11 PM
i orderd it though a dealer

Uncle Jack
12-23-2012, 05:12 PM
That's interesting. I have never seen one listed in the regular Savage inventory. I have a 110FLCP-K in 300 Win Mag and I had to order it through the Custom Shop and wait about 4 months for it.

Sorry to hijack your thread. I was just curious.

uj

Stockrex
12-23-2012, 05:13 PM
cabelas has them sometimes, I saw one back in July in the Michigan one.

spstacman
12-23-2012, 05:21 PM
yeah i waited for mine for five months.love the gun hate the stock

spstacman
12-24-2012, 02:05 AM
anyone?

rjtfroggy
12-24-2012, 06:25 AM
I believe you will need a standard recoil lug for this change over.Good time to go to the machined one from NSS. Then the proper size stock, re headspace and you should be OK.

stangfish
12-24-2012, 11:04 AM
Im not sure a stock change requires a recoil lug swap here. Unless it is too long and hits on the bottom of the recoil lug relief. For the price a choate will work, but I believe you have several options. If you need a high cabpacity detchable mag you need to look at Accurate Mags http://www.accurate-mag.com/BottomMetals.html or someone like that. Not sue about the inletting.

spstacman
12-24-2012, 12:47 PM
well any of these work with my factory dbm

spstacman
12-29-2012, 08:39 PM
any help for a newbe