PDA

View Full Version : Model 12 pawn shop find



Orange_Crush
12-08-2012, 06:52 PM
I only just recently became aware of the Savage Model 12 and its awesome reputation - I used to shoot two or three times a week and always bought and sold a gun or two per year.

So I have been hiding my head in the sand as far as Savage's image and products in today's world....

But last week I was browsing local pawn shops looking for anything that I couldn't live without, and I spotted a used Savage Model 12 in .22/250. Asked 'em what they wanted and they said $349. Seemed like a decent price. The rifle looked a little rough cosmetically, but the bore looked good.

I decided I had to at least think about it overnight and I went home and wondered what I could dig up in trade to knock the price down a little bit. I had a Taurus .22 pistol which I inherited and had never shot. So I took that in the next day and asked if they wanted to do some tradin'. I was actually willing to have given them the Taurus and $200. The guy looked the Taurus over and scratched his chin for a moment and said he'd do the deal for $50 difference.

I could not turn it down for $50 out of pocket.

Have not shot it yet.

Curiously it appears to be a very early model - no accutrigger.

MaDa
12-08-2012, 10:56 PM
Cool deal. Show a picture. Sounds like a great deal. Let us know how it does at the range.

JCalhoun
12-08-2012, 11:26 PM
The pre-accutrigger rifles are very to upgrade with a good trigger, stock, etc, if you decide to go that route.

ellobo
12-09-2012, 05:31 PM
It probably has a flat rear receiver so if you change scope mounts make sure you get the right ones. And check the bore for copper.

El Lobo

Orange_Crush
12-10-2012, 07:20 AM
It is a flat top - thanks for the heads up on that. Any idea on how to obtain and owner's manual?

Is the trigger on the early non-accutrigger models adjustable?

I tried to attach a pic - but I have to figure out where to host it first.

ellobo
12-10-2012, 03:21 PM
Ellobo do you know any of my relatives up in your neck ,MacDonald ,ive got a bunch of family near ya.
Gary macdonald

Sorry Gmac, don't know any MacDonalds. My grandmother was a MacInnes, born in Scotland. I am in southern New Hampshire, city of Nashua. I do know a lot with Scottish ancestry but no MacDonalds.

El Lobo

El Lobo

ellobo
12-10-2012, 03:25 PM
Orange Crush, yes the old 3 screw triggers can be adjusted to around 2.5 lbs. Look in the FAQ section for instructions.

El Lobo

Orange_Crush
12-10-2012, 03:26 PM
El Lobo - thanks!

JCalhoun
12-10-2012, 11:06 PM
You can get the owner's manual from Savage.

Orange_Crush
12-15-2012, 11:46 AM
I still haven't shot the rifle yet - but I have a question about possible customization of the rifle - more precisely, rebarreling to another caliber.

Would it be possible to rebarrel the rifle into a 6.5 Creedmoor? It is currently a .22/250. I have never done, or had done for me any such customization on a rifle.

Orange_Crush
12-15-2012, 12:04 PM
Its just a cell phone pic, but here is the pawn shop beast:
https://lh5.googleusercontent.com/-nrzmBMxFSIc/UMydPuOC4BI/AAAAAAAAAhU/tl6uFCUss48/s128/savage12.jpg

thomae
12-15-2012, 03:34 PM
Its just a cell phone pic, but here is the pawn shop beast:
https://lh5.googleusercontent.com/-nrzmBMxFSIc/UMydPuOC4BI/AAAAAAAAAhU/tl6uFCUss48/s128/savage12.jpgLooks like a Savage, only smaller! :p

Orange_Crush
12-15-2012, 04:39 PM
I have no idea why the pic is appearing so dang small.

Blue Avenger
12-15-2012, 05:51 PM
Ellobo do you know any of my relatives up in your neck ,MacDonald ,ive got a bunch of family near ya.
Gary macdonaldhttp://img.photobucket.com/albums/v675/gcidso123/funny%20pic/emocons/thofftopic.gif

jonbearman
12-15-2012, 07:52 PM
You can easily change the barrel on your gun,call Jim Briggs at 1-763-682-4296.He is the guy to go to for barrels and most of the simple toools you will nedd including a go gage you can get at midway.

Orange_Crush
12-15-2012, 09:48 PM
It looks to me that besides installing a new barrel in the 6.5 creedmoor, that the bolt would have to be swapped out or at least modified for the creedmoor case / anything else obvious that I missed?

drybean
12-15-2012, 10:01 PM
your ready to go no bolt head swap needed
drybean

Orange_Crush
03-04-2013, 06:57 PM
Here is my mostly finished pawn shop find on its first trip to the range. The vehicle in the background shows where my username comes from.http://www.burbankphotography.biz/blog1/wp-content/uploads/2013/03/savage.JPG