weaver bases flat back

[scope eye]

Anyone know the weaver base part numbers for a flat back receiver.

Tanks Dean

[Westcliffe01]

Check this page http://www.weaveroptics.com/rings_bases/bases/top_mount_base_pairs/

IDK if yours is a long action or not. I suppose for 2 piece bases it doesn't matter... it looks like 48465 is the part number (these are aluminum BTW)

Look at this chart, it has all the options, including steel, extended, multi slot etc http://www.weaveroptics.com/mountcharts/default.aspx

[scope eye]

Thanks West it looks like I need #46 and #61, if 48465 is not in stock.

Tanks Dean

[kevin_stevens]

Thanks West it looks like I need #46 and #61, if 48465 is not in stock.

Tanks Dean

Those are correct. I have a pair if you want them cheap.

KeS

[stangfish]

Those are correct. I have a pair if you want them cheap.

KeS

That is what is so cool about this site. Good Form Kevin!

[LHitchcox]

If you are using a short scope, you may want to use a 402 instead of the 46. It lets you move the scope rearward about an inch. I use the 402 on all long action Savages and the 46 on the short actions.