87predator
11-23-2012, 10:30 PM
After many years of wanting to build, i finally got one done.
I couldn't wait for a new barrel so got one from a member here. It sits on a Stevens 200 short action, with a recoil lug from NSS. Its in a stockade woodchuck stock. With the 26" Shaw varmint contour barrel, it had good feel of stability, while not too heavy. I stuck a vortex viper 6.5x20x44 on top. I need to get a lower set of rings, but will probably switch out to a viper pst in the near future.
This will be primarily a calling rig for coyotes, but will also use it to fill some whitetail antlerless tags.
I would like to thank these members whom the parts were purchased from:
Lineman-barrel
204 dogger-stock
And NSS for the lug and barrel nut and action wrench.
Last but not least, all of the members here for answers to questions i had, and all of the informative posts.
Now pictures
Before
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/Picture021.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/Picture027.jpg
After
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-24-39_713.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-12_492.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-29_963.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-48_168.jpg
I couldn't wait for a new barrel so got one from a member here. It sits on a Stevens 200 short action, with a recoil lug from NSS. Its in a stockade woodchuck stock. With the 26" Shaw varmint contour barrel, it had good feel of stability, while not too heavy. I stuck a vortex viper 6.5x20x44 on top. I need to get a lower set of rings, but will probably switch out to a viper pst in the near future.
This will be primarily a calling rig for coyotes, but will also use it to fill some whitetail antlerless tags.
I would like to thank these members whom the parts were purchased from:
Lineman-barrel
204 dogger-stock
And NSS for the lug and barrel nut and action wrench.
Last but not least, all of the members here for answers to questions i had, and all of the informative posts.
Now pictures
Before
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/Picture021.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/Picture027.jpg
After
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-24-39_713.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-12_492.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-29_963.jpg
http://img.photobucket.com/albums/v607/87predatorcontrol/gun%20smithing/2012-11-23_18-25-48_168.jpg