radial scratch on breech of my Mark II, any concern?

[ezsit]

Hi all,

I am new to Savage rifles and just purchased a Mark II .22lr. Upon getting home and inspecting it closely, I discovered a small scratch on the breech face that appears below the indentation that the right-side extractor seats into and curves downward in a radial direction. I have included photos to make clear what I see. If anyone can tell me whether this may affect the functioning of the rifle I would be very happy for that information. It appears the scratch is beyond the area where the rim of a cartridge would seat. I have not fired the rifle yet. Any help would be appreciated. Thanks.

https://lh6.googleusercontent.com/-FcLc44A9oGU/ULADMosP9DI/AAAAAAAAAAc/l6Ly4lZr3Yg/w507-h781-p-k/IMG_0083.JPG

https://lh6.googleusercontent.com/-4BZScd0JjXk/ULADPROgEKI/AAAAAAAAAAk/YkPQ9_66uIo/w186-h166-n-k/IMG_0085.JPG

[sharpshooter]

That was probably done at assembly and it won't hurt anything as far as feed and function. Don't lose any sleep over it.

[ezsit]

Thanks for the answer. I was hoping it was nothing. Have a great day. :-)