bedding pillars

[savage300rum]

can anyone refer me to a source for obtaining bedding pillars for a savage...every search on the net shows remington pillars

[pa hog]

Site sponsor :


http://www.stockysstocks.com/servlet/the-434/Savage-10-fdsh-110-Steel-Pillar/Detail

[yorketransport]

I went the cheap route and used threaded lamp rod that I picked up from the hardware store. The key word here is cheap, not easy. :-\ it wasn't dificult by any means. It just required a little work. Get the pillars from Stockys and do it the cheap and easy way.


Andrew

[GaCop]

I planned on using lamp rod but found out no one in middle Georgia (Lowe's Home Depot, Ace) carried lamp parts any more. I even tried Hobby Lobby to see if they had lamp kits, no dice. I ended up ordering pillars from Brownell's.

[rjtfroggy]

Stocky's as mentioned, cut and ready to go for $11.00.

[jpdown]

I've bought and used these pillars off Ebay with good luck. Just state the kit you want when you place the order.

http://cgi.ebay.com/Gunsmith-Extra-Pillar-Sets-for-Bedding-Kits_W0QQitemZ190334085200QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item2c50cba850

[lwink]

I believe Stockade Stocks will sell them to you as well

[pdog06]

I went the cheap route and used threaded lamp rod that I picked up from the hardware store.



I bought some today and cut them out tonight to pillar bed a Striker stock.