Trigger Not Setting

[SlimySquirrel]

Hi Guys,

I am having a few issues with the firing pin not setting when cycling the action quickly.

Works every time when cycled at a slower speed but not when done at pace.

Anyone else had this issue? It has a Rifle Basix sear adjusted to about 2 lb and is Pre E receiver MKII FVSS

Cheers

Slimy

[82boy]

The trigger is too light.

[SlimySquirrel]

Sweet. Thanks for that. I'll get it seen to!

[big honkin jeep]

The bolt stop sear combo may also be binding. You may be able to adjust and lube the pins and check clearances within the stock.

[SlimySquirrel]

Ok cheers!

I'll get the Smith to adjust it whilst he beds the new stock.

He mentioned that a GOOD bedding job and aggressively floating the barrel will work nicely as its been a bit touchy but under perfect conditions it has shot 1/4 inch at 100yds using the Blue Pack CCI