howabouttheiris
11-04-2012, 10:53 PM
HISTORY:
Savage 12FCV with 2k or more rounds thru it. (my primary target gun to 750 yds)
Original accutrigger replaced once (after 2-300 rnds) due to shear issue. (Even in a vice, I could not close the bolt soft enought for it not to fall to safe.) Great service, replaced by Savage.
Have not had an issue since. ps I am very aware and capable of using the trigger without tripping the fall to safe. I have the trigger set light, but not to the min.
STORY:
So on the range tonight 5 rounds in , I experience a primer blowback (pretty good vent with smoke pouring out around the bolt)
It was factory PRVI 69g match ammo, that I have used with good results.
From that point on, I had about 10 trips to safe out of my final 35 rounds.
QUESTION:
Could I have damaged anything? When I disassemble to clean it there anything that I should look for wrt damage?
Would it be plausable that I am just fouled (not damaged) and a clean will get me back to working order?
Thanks!!!
Savage 12FCV with 2k or more rounds thru it. (my primary target gun to 750 yds)
Original accutrigger replaced once (after 2-300 rnds) due to shear issue. (Even in a vice, I could not close the bolt soft enought for it not to fall to safe.) Great service, replaced by Savage.
Have not had an issue since. ps I am very aware and capable of using the trigger without tripping the fall to safe. I have the trigger set light, but not to the min.
STORY:
So on the range tonight 5 rounds in , I experience a primer blowback (pretty good vent with smoke pouring out around the bolt)
It was factory PRVI 69g match ammo, that I have used with good results.
From that point on, I had about 10 trips to safe out of my final 35 rounds.
QUESTION:
Could I have damaged anything? When I disassemble to clean it there anything that I should look for wrt damage?
Would it be plausable that I am just fouled (not damaged) and a clean will get me back to working order?
Thanks!!!