left hand MOA Base??

[mikeooa]

Help!
I am looking for 20 moa base for left hand model 10 .260 rem. where on the internet are they hiding!
Thanks in advance
Mike S
Biloxi

[geargrinder]

I use RH rails on all of my actions. Never had a problem.

On an EGW rail the only difference is the placement of a 1/8" bevel. Nothing that would make a difference.

[helotaxi]

Yep, the EGW rails are ambidextrous and the Weaver rails are very slightly right hand biased. A 2-piece base with Burris Signature rings with a set of off-set bushings installed will do the job very well also.

[geargrinder]

EGW makes LH and RH bases, and they are different. Just not enough to make a difference.

Here's a picture of a LH EGW base.

http://i234.photobucket.com/albums/ee269/geargrinder123/IMGP1363.jpg

[helotaxi]

The two I have are symmetrical, and have that cut on both sides. The Weaver tactical rail is tapered from left to right by about 3/16".

[geargrinder]

Wonder when EGW started that? That picture is a couple years old.

[helotaxi]

Both of mine are about 3 years old.

[pitsnipe]

The 20 moa EGW base I purchased in @ April is the same on both sides. I have it on my left handed Mdl 10 short action. No obstruction upon ejection. Catchy phrase. Sounds like a bumper sticker.
Good luck

[mikeooa]

Pitsnipe, thanks for the info. I will order asap, us southpaws are tough to locate what we need. I like "no obstruction upon ejection" has a porno type ring...

[Txhillbilly]

I have an EGW,Weaver,and 3 Ken Farrell bases on my lefties,the Farrell's are by far the best.But they cost 2-3 times more.

[helotaxi]

I've always wondered how you can get better than square and in spec...