View Full Version : Primer Pocket Uniforming Tool
supergolfer18
10-03-2012, 04:04 PM
Was wandering what do you think is the better uniformer out there?
I was looking at the K&M tool, the Sinclair tool, the possum hollow and Holland tool(both of these have Large and small uniformer in same tool)
drybean
10-03-2012, 04:48 PM
can not say witch one is the best,but my K&M works great
drybean
thomae
10-03-2012, 07:32 PM
I can not say which one is the best,but my Sinclair tool works great.
There are two separate bits: one for small primer pockets and one for large primer pockets.
The bits are made of solid Tungston Carbide, so they should never really wear out.
I don't use the "screwdriver" handle that comes with the kit. Instead, I chuck the appropriate bit into my mini lathe and simply push the brass onto the bit until it stops cutting.
Sometimes my hand gets sore after several hundred rounds, but I usually only uniform the primer pocket the first time I prep brass. After that, I use a primer pocket cleaner as necessary.
It is fast and easy. I recommend it highly.
82boy
10-03-2012, 10:44 PM
I have posum hollow and it works great, I have a russ hayden and I dont like it as much. Skip Otto machine is the best out there but Skip Otto passed away a few years ago, and there is not new ones being made.
supergolfer18
10-05-2012, 06:47 PM
will the possum hollow easily chuck into a drill?
82boy
10-05-2012, 08:47 PM
will the possum hollow easily chuck into a drill?
No it will not
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.