DennisH87
10-02-2012, 02:17 AM
The pillar on the front action screw got stuck when I was glass bedding my rifle and when I unscrewed the action screw it turned and now is removable. Should I take some bedding compound and apply it to the pillar and stick it back in or is it fine to have it movable in the stock. It takes a fair amount of pressure to push it out but I don't like the idea of it being even slightly loose in there. I'll have to take and drill the bedding compound out before I do anything. Also, should I push the rear pillar out and bed that too? The stock is a laminate wood stock off of a Savage BVSS.